How to connect MK 590 thru active sync - Zebra Symbol MK500 Data Terminal

Hi there,
For normal installation , you have to install Microsoft Active Sync 4.5 for your Imate Jam and a USB cable, You can download the Microsoft Active Sync software from the link below
Microsoft Active Sync 4.5
Once you download the Microsoft active sync , simply run the setup and it will install it automatically, then connect your mobile phone, and it will install your phone automactically
If you require more assistance, regarding this feel free to reply to this post
Regards-BA

For some reason I have a CD that is labeled "Sharp Software CD-ROM OZ-590/ZQ-590". Could this be what you are looking for?

PS - I never owned one so I dont know why I have it.

u need to download active sync 4.5 and den ur mobile will connect thru pc..........

there is no need for drivers for sync u just need active sync installed in WINXP if u dont have active sync install it from www.windowsmobile.com or see if it came with ur mobile in a cd and Windows mobile device centre in WIN VISTA that is bundled in the installation already u just find it by typing in search WMDC or in All programs u can look for it after u launch it just connect ur mobile thru usb cable provided and go in ur mobile pda start>settings>connections>usb connections set ur device for sync not mass storage and then press ok open the active sync software in xp or WMDC in Vista and it will automatically connect ur device then sync ur device as req



pls let me know if i can help u more in this and pls rate fixya if i have fixed ur problem

u have to sync ur contacts u can do it by connecting it thru usb cable provided woth pda and thru active sync create a profile and there u go

you must go and download active sync from website.And install it to your computer.

You don't really need for it to. You can go to setting on your Axim, then to connections, and use the avant go connection, to connect, and synch with avant go that way. You can synch to avant go that way, with any internet connection. If it's connected to active synch as a guest then you can't synch with active synch also.

This may be a simple case of removing all the entire active sync directory. If you used to connect via serial+com it wont be detected on usb. Remove active sync from your pc via the add remove program feture, then reboot and re install. Then run the make a connection again from active sync. Hope this helps

There have been issues with the cradle PCB on the EM-500. Casio has redesigned the same added an IC & a few additional componentes. I had similar problems & simply could not connect through the USB port. Worked flawlessly with the accessory serial cable (direct connection - no cradle ). This also was on an XP system. See if you can wangle out a free replacement/fix for yout cradle from Casio.