I need to turn off the alarm on my Taylor brand 5846 kitchen timer.

To disable the alarm function on your Taylor weather station type WEC-1502, follow these steps:

1. Press and hold the "ALARM" button on the top of the unit until the alarm icon disappears from the display.
2. Release the "ALARM" button.
3. Press the "MODE" button on the top of the unit until the display shows the "CLOCK" mode.
4. Press and hold the "ALARM" button again until the alarm icon disappears from the display.
5. Release the "ALARM" button.

Your Taylor weather station should now be set without the alarm function.

http://waterheatertimer.org/Din-rail-timers-and-manuals.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Copy following links:
http://waterheatertimer.org/Woods-timers-and-manuals.html#FM1D
http://waterheatertimer.org/how-to-set-timers.html

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Describe timer in detail, or include photo for identification.
Read manual.
Buy another $8 timer.
Buy different brand.
instead of buying timer, use clock functions on cell phone for stopwatch, alarms, etc.
Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Love those Taylor Timers! From your description, I believe your mom most likely has the Taylor 5806 (picture below / product website: http://www.taylorusa.com/kitchen/timers/digital-timer.html).



If so, the small instruction sheet that comes with this upon purchase can be found here:
http://www.taylorusa.com/media/IBs/5806_ib.pdf

I hope this answer your question, and if so, please be so kind to give this a thumbs up! Have a good one!

press the Hr/+ key and the Min/- key at the same time...it will reset.

here is a link to a referance of fault codes
http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx#Hotpoint%20Range%20/%20Stove%20/%20Oven%20Fault%20Codes