Posted on Apr 09, 2009

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Stops during rinse cycle

My washer stops during the rinse cycle, then the time flashes. It flashes for about a minute, then will stop flashing and turn the drum a little, then begins flashing again. Could this be something with the belt slipping or the motor not having enough torque? Thanks

1 Answer

Anonymous

Expert 190 Answers
Posted on Apr 09, 2009

Anonymous

Expert

Joined: Jul 09, 2008

Answers

190

Questions

Helped

78959

Points

619

Dear customer,

We recommend the following when a washer's cycles dont advance..

If the washing machine fills with water and begins agitating, but the timer does not advance, the timer probably needs to be replaced
If the timer does not advance while the washer is in a spin cycle, the timer probably needs to be replaced
If the timer does not advance during the rinse cycle, check whether water has filled the tub, if not, it is likely cold water related. Check the cold water supply valve, check the supply hose for kinks, check the filter screen and check the water inlet valve

For details on how to self test these parts plz refer to http://www.acmehowto.com/howto/appliance/washer/washer.php
Plz rate this solution.. thank you..

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

2answers

Rinse light flashing on amana washer

My Amana washer is stuck on rinse

Read full answer

Dec 08, 2017 • Amana Washing Machines

1helpful

1answer

Whirlpool Duet washer, during the wash cycle, get H F error code

Hi

Thanks for using FixYa. Error code F/H means no water was detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed. It can also happen if the control has turned the water valves on and after 8 minutes the flow meter has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash. You’ll need to Press PAUSE/CANCEL twice to clear the display. Please do rate the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Read full answer

Jul 31, 2010 • Whirlpool Washing Machines

1helpful

2answers

Stop frequently on spin and rinse cycle F6 code

I have a Kenmore Elite he4t front load washer that was working fine and then we moved and now it stops washing midstream and flashes an F and a H. I have to pause and restart then it will stop washing again after a few minutes and flash the same codes again. I reset again and then it stops with 1 minute left and will not drain.

Read full answer

Apr 06, 2010 • Kenmore Elite 45986 Front Load Washer

0helpful

1answer

Whirlpool Cabrio wtw6600 stops at rinse and flshing light and sound, then afert pressing pause resum washing

Press STOP/CANCEL to clear the display and completely cancel the cycle

flashes if the washer loses power during a running cycle. The washer does not flash "PF" when it is first plugged in.
Press START to continue the cycle from the moment that power was lost

Read full answer

Mar 09, 2010 • Whirlpool Cabrio WTW6600SBT Top Load...

0helpful

1answer

Washer stops during rinse cycle and isn't easily restartable....

Sounds like the contacts in the timer has a problem. Unplug washer. Remove the back of the washer and spray WD40 in the timer. Put towels around and under to to collect excess runoff.
Rrotate washer dial 25 times and spray some more wd40. Rotate 25 times again. Do a wash load. If it works put everting back together.

Read full answer

May 04, 2009 • Kenmore 3.2 cu. ft. Plus Top Load Washer

0helpful

1answer

Washer stopping and flashing F 06 fault

F/06 ---- ERROR IS FOR ----------- Drive Motor Tachometer ErrorThe control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.----------
AND TO SOLVE THIS ---------Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU) --
Check the Drive Motor
Check the MCU
Check the Wire Harness

Read full answer

Apr 02, 2009 • Whirlpool Duet GHW9150P Front Load Washer

3helpful

1answer

Washer stopping mid-cycle with no error

Remove the 3 screws at the bottom of the front panel under the washer door. Your filter door will be light brown. If you find a hose there it is to drain out excess water (water that could not be drained by your pump) After you have drained, unscrew the cap and remove all the junk inside. Have a large plastic bag to catch junk and water. Refit carefully after cleaning out. If not solved, something shd be blocking your pump, check this out. F-21 filter blocked.

How abt a nice rating for the free help?

Read full answer

Jan 04, 2009 • Whirlpool GHW9300 Duet Washer

0helpful

1answer

Washer stops and must be restarted flashes F51

there is a updated wiring harness and sensor on the the bottom of this tub on the motor. It needs replaced

Read full answer

Nov 13, 2008 • Kenmore 22422 Top Load Washer

33helpful

2answers

Bosch classixx 1000 washing machine - stops on spin

Washing machine stops at the spin cycle - light flashes. Have to drain water out manually. Happened last week and was then able to run an empty rinse cycle. Machine worked normally for another week. Same problem today but have had to drain water manually from the drum after trying an empty 90 wash and rinse cycle (both stopped on the Spin and flashed). Any ideas? Thanks. x

Read full answer

Apr 29, 2008 • Bosch Classixx WVF 240S Front Load Washer...

0helpful

1answer

Washer stops during wash cycle

you may a pluse cycle where the washer will stop for a couple of min, this cycle is for perm press to minimize wrinkels

Read full answer

Nov 12, 2007 • Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?

View Most Popular

Duet GHW9150P Front Load Washer

Washing Machines

Rinse light flashing on amana washer

Amana Washing Machines

824 views

Ask a Question

Usually answered in minutes!

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Whirlpool Duet GHW9150P Front Load Washer? Or just drag it here!

Related Topics:

Trustworthy Expert Solutions

Stops during rinse cycle

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Rinse light flashing on amana washer

Whirlpool Duet washer, during the wash cycle, get H F error code

Stop frequently on spin and rinse cycle F6 code

Whirlpool Cabrio wtw6600 stops at rinse and flshing light and sound, then afert pressing pause resum washing

Washer stops during rinse cycle and isn't easily restartable....

Washer stopping and flashing F 06 fault

Washer stopping mid-cycle with no error

Washer stops and must be restarted flashes F51

Bosch classixx 1000 washing machine - stops on spin

Washer stops during wash cycle

Not finding what you are looking for?

Duet GHW9150P Front Load Washer

Rinse light flashing on amana washer

Ask a Question

Top Whirlpool Washing Machines Experts

Mike Cairns

ZJ Limited

Brad Brown

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Stops during rinse cycle

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Rinse light flashing on amana washer

Whirlpool Duet washer, during the wash cycle, get H F error code

Stop frequently on spin and rinse cycle F6 code

Whirlpool Cabrio wtw6600 stops at rinse and flshing light and sound, then afert pressing pause resum washing

Washer stops during rinse cycle and isn't easily restartable....

Washer stopping and flashing F 06 fault

Washer stopping mid-cycle with no error

Washer stops and must be restarted flashes F51

Bosch classixx 1000 washing machine - stops on spin

Washer stops during wash cycle

Not finding what you are looking for?

Duet GHW9150P Front Load Washer

Rinse light flashing on amana washer

Related Topics

Ask a Question

Popular Questions

Whirlpool Duet Sport Washer will not drain - F-21 error

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Whirlpool Duet Washer-error code "sud"

Whirlpool duet washer-error F06 and E02

ERROR CODE (F24) ON A WHIRLPOOL FRONT LOAD WASHER

Top Whirlpool Washing Machines Experts

Mike Cairns

ZJ Limited

Brad Brown

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides