Need Bendix King LPH 5142 A Programming Software

You need to have the programming software and cable. It is an older radio and I do not think it is Narrowband capable, meaning you cannot legally transmit in the USA.

You may not be able to. If you have the programming software and cable look for the W/N option for each channel. I don't think the EPH is NB compatible.

Here's a video null suggested as a solution to your problem from YouTube:


Homemade Radio Repeater COR using Bendix King LMH-3142 VHF Base/ Mobile Transceivers

With BK radio the "H" tells you it is VHF "U" is UHF. So LPH, GPH, DPH, GMH are all VHF.A EPU would be a UHF. Michael

EMH-5990a covers 136 to 174 mhz and can be had from ebay for a reasonable price

Pin 3 is ground and pin 2 is the PTT line. Short these two pins to activate the PTT.

lay the handheld on its back, the two pins closest to the table top and bottom are the two pins, use a dime or paperclip works best.

wb6sub, hi don't know if you have the manual for this radio or not, but if not, here is the link for it;
http://www.49ercom.com/pdfs/DPH_Program_manual.pdf
On page 15 it mentions contacting BK for the software to go with your cable.
"2.4 PROGRAMMING BY COMPUTER
Programming a radio from a computer is not covered in this manual. Contact BK Radio for the programming cable, software, and manual required".
http://bkradios.com/thumbnail.asp?offset=0&deep=2&cat_id=202
Hope this helps you out in your search, let us know,,, Mechanic

http://www.repeater-builder.com/bendix-king/b-k-index.html

did you radio works in this repeater before?