Purchase debate ie: lanier v. sharp copier

Did you try postscript driver from the Lanier website?

Lanier's download support page not very user friendly. Almost gave up.

http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/mpc25/mpc25en.htm

They have a universal PLC-6 printer driver. Maybe the same one as above.

http://www.lanier.com/solutions/common/universalprintdriver/default.aspx

This is a common error code for Ricoh copiers, Savin and Gestetner copiers that need service. Recently Ricoh has purchased Lanier and now is naming all their new machines Lanier instead of Gestetner, Savin and Ricoh. However, the copier service error codes have remained he same.
When you get this copier printer service code it means the fuser or fixing assembly (same part) has thermistor problem. The copier fuser's thermistors help regulate the temperature of the fuser assembly. The fuser assembly on all copiers including Canon, Kyocera, Ricoh, Sharp and other brands is the part that melts the toner onto the page.
Getting back to the repairing the copier on Ricoh, Savin, Lanier and Gestetner models that have the fuser or fixing code error. The majority of the time the fusers' thermistors (Middle and read) need to be replaced. Just cleaning them will not solve the copier repair service code.
It is usually, depending upon the machine, its a 1 to 2 hour copier repair job because the copier repair service technician will need to dissemble the fuser, insert the two new thermistors, re-assemble, reset the error code and test the copier machine repair. Also, ask the copier technicians to to do a copier cleaning maintenance while on site.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

We also just had someone donate this same type of copier to us and do have a manual. We are currently having trouble with the stapling unit running continuously. The manual is about 130 pages. I may be able to scan it to you in a few days if you'd like.

On the keyboard......User tools> administrator tools>address book.
you make your changes\ additions here.
You also must have your network settings completed in user tools. DNS, SMTP SERVER, GATEWAY ect....

tHE sC 40 xx CODE TO REFER THE FAN SUCTION MOTORS.

Should be as follows:
"User tools"
"system settings"
"key Operator"
"program/ change/delete address"
Then select the appropriate function /address, etc. to change

Please let me know

enter the [user tools/counter] then before you press [system settings] hold it down pressed the [#] key and while the [#] key is pressed press the [system settings] key (on the touch screen or if dose not have touch screen than press ok) and the copier will return the settings to default. You can repeat the procedure for all settings.

Go on line to Lanier.com, chose manuals. Then put your model in and that you want the users manual and down load it. Most of these kind of manuals are free to copy.

What error if any do you get? Sounds like your printer needs a firmware update.
Carl ( Lanier tech )