My computer have power on password , how to rest it

Go into settings by using the existing password. If you have none, remove the on board batteries, wait a while. Then insert them, power up and go to settings. Old password should have been lost.

power it off, and press (Vol+)+Power Button and the rest follows after..

chief670,

Click the link below for information on resetting your windows password.

How to Rest Your Windows XP Password
http://dell.to/1beBrrr

Thank You,
Dell-Jesse L
Dell Social Media and Communities

Try plugging it into your computer see if you have all the drivers still, you should be able to open the folders in it on the computer let me know?

RTM yet< here I will read it to you.
learn the fixya is not HP and only the real HP can validate ownership. never will fixya, sorry.
be like asking chevy to fix a Ford .
did you know HP has forum ? one of the larger PC maKERS ON EARTH, No less.
the PC is 14 years old now. be time for new RTC coin cell
if the cell is bios goes nuts, and maybe password rests
ive never seen one last 14 long years yet, hint hint

page 3-13 (jumper) amazing things called books

http://h10032.www1.hp.com/ctg/Manual/c00093003

1) Close the browser
2) Shutdown and Turn off your computer
3) Unplug the power cord and press the power button once.
4) Take a rest and sleep.
5) When you wake up., think and you will
easily remember your password.

Do you mean the password required during the start up of the computer ? It also depends on the OS you use. If this is the rpoblem and your OS is windows based then go to 'control panel'. Click 'User accounts' tab. Click on the 'change windows password' tab. Three options will come. You click on 'Remove password' tab. Do the rest of the process. Now you can start your PC without a password.

You can clear the bios password by removing the CMOS battery from the motherboard, make sure the PC is disconnected from any other power source, wait a good 3 - 5 minutes, hit the power button a few times to make sure all power is drained from the capacitors, and then replace the CMOS battery. You can then power on the PC and the bios password will be removed.

HI

You can do a reset and it will reset to the default password which is admin. the reset button is right next to the power connector. Hold it infor 30 seconds, while holding it, pull the power connector out then hold it for 15 seconds longer. . afterwards , release the rest button and put the power connector back in. the go to the setup page, 192.168.1.1 and login with the password admin (no need for username.)


Thanks
Proton