Id1660 camcorder keeps freezing - Pelican 1660-020-110 1660 Large Hardware Case

You don't say where you are but there are numerous outlets in UK selling these camera's. I'm not sure why if they are current stock you didn't get one with yours? Was it second hand or a gift? You will have to search the web if you can't find a dealer with one. Try the main Polaroid factory web pages.

you dont say what size or type of card you have there? did you previously use the card elsewhere? format the card on a PC using SDFORMATTER (google it) hope that sorts.

Install the driver that cames with the camera in your pc and plug the camera to the pc then go to install new hardware and see if it finds your camera, it probably will do.

My MV830 would load without a cassette; but freeze, beep 3 times and eject if a cassette was inserted. I read the following thread with a great deal of scepticism and concern that I would damage my MV830 camcorder even more; but what did I have to lose? I loaded the compartment without a cassette, hit it firmly 3 times on the tape loading side and the issue was gone. It now works perfectly! Technology is fantastic...
http://www.fixya.com/support/t238707-will_not_load_tape

Use a higher quality SD card. PNY or SanDisk usually works well with flash camcorders. Also make sure it's a HCSD card ( High Capacity ).

Hi,
Take out memory stick from camera and check does it still freeze?
I think memory card in camera is causing problem.
Hope this info will help you.

At least the following works on my first generation Flip Ultra camcorder (not Mino). Remove battery, put it back next morning. After that be careful not to touch "on" slider switch on the side of the camcorder while Flip logo is still on the screen. I mean turn the device on by using the slider switch and do not touch that switch again until Flip logo on the screen is gone. Doing the opposite (trying to use the "on" switch again while device is still "booting" and Flip logo is on the screen) will lead to the Flip Ultra freeze.

hold power button for 5 secounds keep it held, then hold red button while still holding power button keep red button and power held for a further 20 secs or so it will turn off. worked for me

use ULEAD MOVIE MAKER as your uploading software and try to use USB as your connection to the camcoder and pc.


CHARCOIS

have you tried to plat back on another player.?Could be either at fault,seeing as is playing back ok on cam would suspect your player.try playing on another player to see which at fault.