Question about Whirlpool Duet GHW9150P Front Load Washer
Do you know what this error code means and how to fix. Washer works 1/2 way through cycle thn stops and beeps showing this code. Thanks.
Just take off the bottom kickplate (3 screws on the bottom). You'll see the pump front and center. Twist the front face of the pum slowly to the left. All the trapped water will flow right out towards you. There could be a sock or some other debris there. Unclog, screw that faceplate back in and start it up.
Posted on Jan 16, 2011
The SUD message relates to overdose of detergent detected during the Wash Cycle. This may signify a bad pump, an extra heavy load, excessive detergent or excessive suds. If too much detergent was used, run the washer through a Rinse/Spin cycle, then a Normal cycle, without adding any detergent. This should clear the unit of the excess detergent. Check the drain hose and make sure it is not plugged or kinked. Good luck
Posted on Sep 06, 2007
No solution yet...having SUD and F35 error codes. Have cleaned all mentioned tubes, cleaned drain plug on bottom...awaiting a pressure switch...but don't know what else to try.
Posted on Jun 05, 2012
Works!!!!! found a five dollar bill and my wife's long lost diamond ring!
Posted on Dec 09, 2012
Found the three screws at bottom of washer and in the trap i found a sock causing the 'SUD" error. Many thanks for this tip. Before I removed bottom panel the drain in the washing machine itself underneath the rubber seal at position 6PM I also found three socks ha! Everything works perfect now. I now use a mesh bag for washing the socks to avoid this issue.
Posted on Oct 18, 2011
I'm still getting error sud and f02 after cleaning everything out - any other suggestions?
Posted on Mar 26, 2016
If you open back of washer there is a service technician manual tells codes an possible reason and how to fix
Posted on Oct 01, 2015
Sud code and subsequent F02 code on GHW9400PW4 Whirlpool Dute HT was caused by a clogged AIRTRAP, part # 8181731. When removed, cleaned out, and put back in, the washer drained and spun as new.
Posted on Jun 16, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 25, 2016 | Whirlpool Washing Machines
Aug 09, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jul 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jan 30, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Oct 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Jul 12, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Jan 28, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Feb 17, 2008 | Whirlpool Duet GHW9150P Front Load Washer
47,456 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: