My dish network remote isnt working with my LG tv

If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Hey there marlastewart!

I can definitely assist you in getting the codes for that. You can view this link http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx to search for codes based on the equipment and brand.

If none of the codes work let me know and I can try further troubleshooting with the remote!

Tommy Faust
DISH Internet Response Team

I would suggest you try and use the codes Direct has given you for Zenith, Goldstar & LG tvs. There a good chance that's who made the tuner in your tv. Hope this helps.

leoidalgo

I have provided the remote codes for your Zenith TV. I have also provided a link with instructions on how to program the remote to the TV. I hope this helps.

Remote codes: 501, 652, 766, 500

Program remote, step 6:
http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

If you have the code sheet try the codes for LG or Goldstar one of those will work for the Zenith.

http://www.remote-codes.com/
try here

Try using goldstar or LG codes with the remote. (LG/Goldstar owns Zenith)


michtech

Zenith
101, 142, 149, 177
try these out and see if it works

Here is the response from LG/Zenith customer support:

Unfortunately, this remote has very limited programmability. The manual is correct.

INSTRUCTIONS: Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code.

1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table).
2. Release TV POWER button. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code Number
LG/GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4

For further information or troubleshooting, you may contact us at 800-243-0000 for LG Customer Service assistance. An agent will be glad to assist you. Please feel free to contact us with any additional questions or concerns. Thank you again for contacting LG Electronics.