Need to disassemble rotozip - Bosch RotoZip Spiral Saw RZ10 - 2100

https://www.mmtoolparts.com/store/rotozip-parts

Jim, if you can not turn the spindle easilly, the bearings are very small on the rotozips and one may have seized.

The manufacturer's web site has the manuals for many of their tools on their support page: http://www.rotozip.com/en-us/support/Pages/Manuals.aspx . If you have the RZ-20, the direct link to the manual is http://www.rotozip.com/en-us/support/Documents/WEB2610938267%2002-07%20RZ1-25.pdf .

I don't know of a Z20 from RotoZip. I hope this helps.

Cindy Wells

Hi Rita,looked very hard and found this site,here's the main site too. http://www.rotozip.com/en-us/support/Documents/2610008432%2008-10%20RFS1000.pdf If this isn't your saw,try this link. http://www.rotozip.com/en-us/support/Pages/Manuals.aspx

http://www.ereplacementparts.com/rotozip-parts-c-15402.html?utm_source=Bing&utm_medium=PPC&utm_campaign=rotozip%20-%20search%20-%20mike Try here.

Here is a link to their site. It would be under the section for "support."

Rotozip site

It looks like Amazon still has a manual for the Rotozip Rebel with some other accessories. Hopefully this'll cover it:

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000003436.pdf

I used my Rotozip once, off and on for about one hour total time. I put it away, very glad that I had bought it. It did a great job by the way. I did not need it again for another year and a half. Recently, I had another "honey do" project to take care of, so when I took it out of it's tool bag, I was certain it would take care of my project in no time. I plugged it in, hit the switch and nothing. So, I plugged it in another outlet... nothing. Shook all the cords to check for a broken wire... nothing. No power... nothing. Talk to me, is there a circuit breaker in there somewhere or do I have to send it back to Rotozip?

Press in shaft lock button, use supplied open-end wrench to loosen collet--RH thread and remove bit by hand.

go to tool parts direct online.