Bigfoot won't talk anymore - Mattel Fisher-Price Imaginext Big Foot

I don't understand.

does it get faster with speed the clicking ? could be a bearing !

Okay, I had the same problem of Jabra Journey not talking anymore, 'voice on connected "etc. And instead it only made sounds like bing bing... Here's the answer and its so simple! Turn the unit off with the slider off/on switch, (symbols are - or o). Then, press and hold the button at the very end of the unit, (symbol looks something like sound waves), while sliding the power back on. That's all there is to it and you'll hear it start talking again.

Hi newbould4,

Please follow my below Tip on how to get the best results from your Dishwasher:

DISHWASHER NOT CLEANING WELL ANYMORE...

Kind Regards d")

JEDEMEYER1

* If this solution helped you, please rate it

You may find it easily at a Radio Shack type of store -- here are the specs to ask for:

Input 120 VAC, 60 Hz, 0.3 A, Output 8.4 VDC, 300 mA, 2.5 VA

Take the rechargeable battery with you, though! You'll need to be sure you get one with the right connector. If you can't find it locally, you may be able to order it through Fisher-Price, Amazon, or eBay.

Hopefully, you'll find it before having to go on a search. Good luck.

From Fisher-Price Site

If Bigfoot stops working, check the following

• Motor Stall - Was there any audible beeps from Bigfoot before he shut down: If audible beeps came from Bigfoot, a motor has stalled.
  • 1-Beep = arm motors stall
  • 2-Beeps = leg motor stall
  • 3-Beeps = head motor stall

To Fix the Motor stall:

• Remove any obstruction from Bigfoot's path.
• Turn the product off and then back on to restart the product.
• If this stall condition continues to happen when no obstruction is present, there is a malfunction with Bigfoot. Please contact Consumer Relations.

In my case I had 2 buzzes and I forced the legs into the stand position. That did the trick.

There's a small wire inside the speaker that broke on mine. I matched one from another fisher price toy and cut wires and dropped the new one in and good as new..

There is a pen hole beside power switch........with the power off press and hold this button (with a safety pen or something)....while holding the button turn it on and hold the button for at least 3 seconds. Then push every button on the remote, then charge the battery until the indicator is "green". That will fully reset your Bigfoot.

SORRY for your son try to reaplace them

Check the sound settings in preferrences to see if you have accidently shut the sounds off.