GIVING ELECTRIC SPARK INSIDE THE WASHING MACHINE DURING RUNNING

The washing machine is not balanced. This might be caused by the washing machine being very packed too tightly or the clothing is not distributed. Or an uneven load.

E1- Common switch wire is defective-Replace thermistor if found defective

read owner manual.

Pressure Switch is defective or tubing going from it to tub is stopped up

White magic h65.while switching on he showed LE now it's showing PE,how it will resolve

it looks like the air volum control is very dirty and wont tell the machine toto stop filling water also it is giving the wrong signals to the machine it positioned there is a round thing on top of machine just inside top with a little tube running down to an entery point it is usually at this point the clogging takes place so clean it failing that look to the inlet valve

lf means long fill check your fill hoses and make sure the water is comeing out. sounds like a problem with your inlet valve and/or your water from your house is not right.

LE error will get displayed when the Lid is opened. Close the Lid and this will get resolved. Similarly you will get FE when the water is not flowing properly into the Machine its a Fill Error.

Unplugged the unit; replugged it. Buying a new machine.

if you have a self clean oven, do not use an abrasive cleaner to clean
I would recommend running a self clean cycle, and anything left
"Mr. Clean Magic eraser" should take care of it.
it works miracles in ovens