Need replacement bulbs florescent FLS/E9W 6400K CE not found where I purchased lantern.like the lantern ,but useless without working bulbs-HELP!want to order 4 to keep on hand, Thanks!!

1 Answer. If it is the yellow floating lantern you have to remove the black plastic stub on the underside of the reflector using needlenose pliers to wiggle and slightly pull until it releases and the bulb will come out. This worked great! Eveready should have this as one of their FAQs.Jan. 6, 2011

How do I change the bulb of the 6V Eveready Lantern? - Fixya

I believe you are referring to a Finbury Park lantern. The following site sells FP lanterns and bulbs. I suggest you query them with the specifics.

https://www.lights4living.com/elstead-finsbury-park-lights/s463

I hesitate to suggest other "bulb" sites as they might lack the ability to find the bulb simply by the lantern ID. If the bulb has an ID number, that would help.

Here is one such "bulb" site:

https://www.1000bulbs.com/?msclkid=85883f8c924112a60229634ff913f1ec&utm_source=bing&utm_medium=cpc&utm_campaign=Light%20Bulbs&utm_term=cf18dde841%20bulbs&utm_content=1%20Metal%20Halide

It tells you on the top of the lantern if it is the 6 volt type - you unscrew the large knob, and the base will come off when it is unscrewed completely. To change the florescent bulbs, you unscrew the small knob.

The adapter need to match the charge voltage requirements of the battery in the Swissgear lantern.
This voltage maybe written on a label on the lantern.
i suggest go to the shop where you purchased the lantern for the charge adapter.

18 watt should work fine, but give less light.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

I think the switch can be replaced. Here on amazon you can purchase parts: Amazon com Coleman retro parts I hope this helped. Cheers

The Leviton 6681 is a push-button rotary-type incandescent dimmer with 600Watt capacity

If you have incandescent bulbs, the dimmer should work.
If the dimmer has different color wires, try reversing the wires.
If the dimmer replaced a 3-way switch, then this is not the right dimmer.
If you have compact florescent bulbs, you need a dimmer that also dims florescent.

http://www.google.com/products/catalog
Link shows the Leviton 6673 incandescent and florescent dimmer

But you also need dimmable compact florescent bulbs.
http://www.amazon.com/DIMMABLE-COMPACT-FLUORESCENT-LIGHT-SPIRAL/dp/B0014B84ZM

http://adobe-flash-player.software.informer.com/10.0/
This should work

Good Morning:

I also substituted Floescent Bulbs for the standard bulbs. The bulbs would not light up although the relay was working. It seemed that the Florescent bulbs had a somewhat shorter neck. What I did was unplug the drive system from the outlet and then bend the metal connector in the socket so that it would come out further towards the opening of the socket. I then repluged the drive. The Floercent bulbs now have contact and are working perfectly. Simple problem with a simple solution.

Sandman

Hi,

   May I suggest taking the unit to where you purchased it and see what they say? Alph of Spokane WA.