A few days ago my pump on the dehumidifier stopped working...and filled the container; not a big deal. Now, I just emptied the container and replaced it...and it will not turn back on; it appears to think the container is still full. I've manually tried to activiate the shutoff button that works with the float and still nothing. Any ideas? Thank you JimmyPopcorn
I have the same problem and determined it is a clogged filter. You need to take the cover off to replace it. I have logged onto the delonghi website but didn't see the fileter. I will most likely just put anyold filter on it.
If it is not responding when you try to activate the shutoff button and are still not recieving an acknowledgement that the bucket is full you may hav a defective shutoff button. Try contacting the Manufacturer and see if you can purchase just the button. This i a common part and the price is usually reasonable. If you feel very technical inclined you can remove the button and touch the 2 wires together simulating a closed contact. The dehumidifier should now acknowledge the bucket is full. If you recieve the notification then the button is bad. If you found this solution helpful please rate it.
Thanks - Tech101
to not work or collect water..588 views
Usually answered in minutes!
I bought this dehumidifier less than 2 yrs ( after the october storm here in bflo) and it worked great.. I unplugged it for the winter.. and plugged it back in and it started then stopped.. checked the outlit and that is fine. HELP
I have same problem as Jimmy Popcorn
×