My sanyo washing machine ASW-A85HT had a problem on start button...after I power on I kept on pressing the start but it wont start..what seems to be the problem?

SOURCE: Cabrio washer want start.

leave the door open and try it again if it does the same thing as before the door lock has gone

SOURCE: dE code on WM0642HW TROMM washing machine

HI, this is a Door Open Error.

Possible Causes are..-

* Door not all the way closed
* Loose electrical connections at door switch and pwb assembly(Control Board)
* Door switch assembly is out of order(Miss aligned)
* Gasket on door may be creased in

Most common issue here will be a defective door lock switch. check all causes before replacing the switch.

SOURCE: I have Model WF-S6607?WF-S6607TC. Washing Machine.

This might be Lid cover open protection. There is a small magnet at the edge of the lid cover, housed in some sort of a catch.
If the plastic housing cracked, the magnet might have dropped into the washing drum. To overcome this, place a magnet on the position where the plastic catch will contact the washer when the lid is close.

SOURCE: My washing machine is SANYO ASW-90WRTP. showes E4

Check on the machine there is a schamatic and it has error codes on it. it may be on the in side panel.

Testimonial: "cool thanks for that just empty the tub then will check for skidmatics"

SOURCE: My beko washing machine wont do anything at all!

Hi,have you ever solved the problem? Mine is doing exactly the same thing.