Aquamark AM680 potable steam cleaning System. I tried it but the steam is not coming out. Kindly, anyone has a solution? Thanks

hi there did you find a solution i have the same problem thanks

Mine won't work too. I opened the bottom and found lots of boiling water residual around the outlet. That is why no steam come out. Even if I cleaned it, steam becomed very little, 10% of original. I would say Dirt Devil steam mop is just gabbage product. I do not recomment anyone to pay $50 to buy no more than one or twice usage!

Yes indeed seems that the pump is faulty.If you are skill enough buy it and change.Try and error!

no betty, stupid bit of kit imo, no operating switch, just on/off at the switch, which heats the water up. i measured 500ml of water heated using my kettle, put the top on, switched on, and waited. first time the steam didn't come out of the nozzle, so i removed the end and cleaned the nozzle with water, blew down the end from the big end, and replaced it, steam came out. big grumble though, the steam coming out is not that warm, don't advise you to, but i directed against my fingers, it's only hot at the exit of the pointing bit, used it to try and clean floor tiles and grout, complete waste of time. i wouldn't advise anyone to buy one.

It sounds like the pump that pumps the water to the heater is faulty. Try the non-return valve on the pump it may be sticking.

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

yes no vinegar please. Try a product called scale clean or tablets for de-scaling coffee machines. Available from coffee machine retailers

Try rinsing it out with CLR, it gets rid of calcium, lime and rust deposits i heard its very good.

kindly please wait...

You might try running a solution of vinegar and water thru it to clean out the lines and spray nozzles. Also are the brushes turning when you are using it, that could also be the problem.