My cell phone screen dont work ...help

pl tel me. my nokia 5130c-2 gose to blank screen

I had the same problem with mine, turns out even if you dont drop it etc, opening and closing it loads can make ribbons inside come out meanining the screens have no input. As this is a hardware problem phone is screwed unless you take it to get fixed.

I had this same phone and the same thing happened to me. I kept shutting it off and on - also taking the battery in and out. I eventually got the screen to light up but it would only last a few seconds. Sorry to say but you will most likely need a new phone. I had to replace mine.

I think the your screen may have given up due to long use or due to miosture. This may be fixed by changing the LCD sreen from your mobile's authorized dealer.

Dear,

first of all tell me what kind of model u have and the brand of ur phone.
if u have any kind of flip or slide phone then it is because of strip brakage. Totally or partially. If the strip is partially broken then can be repaired if totally or more than repairable then u have to replace the strip and ur cell will be in working position.

do it plz.

dont forget to rate it as it will fix the issue.......

You most likely need a new ribbon cable, which is the cable that connects the two halves of the phone. They are not expensive and can be ordered on eBay, and they come with the tools required to disassemble the phone and replace the cable.

the problem is with the phone's display, or with the connector...but it also may be with the phone's software...so I guess you should give it a master reset...but I don't guarantee that it will work

mymomcallsme solution works, I had the problem, removed battery fer a while, viola! Screen is back. Thanks mymomcallsme

the vibrator can be replaced and then you need to have the flexcable replaced.....this will correct the issue

This is a common problem, it has to do with the keypad flex. either the connector on the top part of your phone is unpluged or your flex is damaged. Open the top of the phone where the screen is at (4 torx screws) genlty remove the cover. you will see two connectors, one that goes to the camera, the other is the one you want. genlty pry it off upwards, I would also clean it with some IPA (rubbing alcohol) and a brush, re-connect it pushing down firmly, you will fill it when it connects. if it doesnt work, you can purchase a new flex, if you need repair help, let me know I can try to repair