Hello, we are sorry to hear that you are experiencing this problem with the Dishwasher. We would recommend having a certified technician out to diagnose the problem. If you would like further assistance you can send your name, phone number, address, model/serial numbers and the date on which you purchased the Dishwasher to [email protected]. Thank you.
SOURCE: Detergent lid won't latch shut
The whole dispenser will need to be replaced, they only come complete
SOURCE: error code f4 on my
Blocked waste outlet or maybe just a worn pump.
I fixed a new one today showing F4
I found a piece of broken glass stopping the waste pump.
Hope this helps
john
SOURCE: F8 error on ADP 5966 dishwasher after water cut
f8 shows the filter is blocked ... ... check if filter is behind the panel under the door ...
SOURCE: I put powder detergent in salt compartment in my
Scoop out as much as you can and the fill the compartment with warm water until it forces as much detergent out as possible out and then repalce the cover and run the drain cycle on the machine. The fill the salt compartmwnt with warm water a further 2 or 3 times to get rid of most of it if not all of it and drain. When completed then fill the compartment with salt.
Testimonial: "Thank you very much for your prompt response. Will try straight away, fingers cross!"
Hi
White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle.
Hope this helps... Please post back if more information is required.
Daniel
289 views
Usually answered in minutes!
×