GE Profile Gas Range oven light doesn't work even after changing

Cook using microwaves or convection in this stylish microwave oven that allows your food to be flavorful beautifully browned and cooked quickly .now your microwive didn't work .you should take it to fix .
home light bulbs

pull out the racks and remove the bottom floor of the oven,turn it on bake,if the ignitor doesn't glow most likely it's bad,if it does glow and it doesn't ignite within 40 to 60 seconds the ignitor is bad.even though it glows doesn't mean it's good,it works by amps.it takes 3.2 amps.for a flat ignitor to open the gas valve and 2.5 amps for a round ignitor to open the gas valve.

More than likely you have a bad oven ignitor. It's not uncommon that they need repalced, they do go bad.

Yes, your oven igniter is bad here is the part#WB13T10001
Have a great day!

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101



czvb

I am working with model JGBP26WEH1WW GE Gas range: You do not need to remove the back or even turn over, just remove the storage pan at the base of the unit and disconect the two plugs (unique plugs). You will need to splice your old conectors to your new igniter. Yes you have the correct igniter for that model.

Hi..

You need to do this

• Replace the bulb
• Test the switch

The interior oven light in most ovens is a standard 40 watt appliance bulb. Often, to change the bulb, you first need to remove a shield or glass dome. If the bulb isn't burned out, the problem may be with the switch on the oven door frame. If the switch works poorly, intermittently, or not at all, you need to replace it.

When an indicator light has stopped working, you may be able to replace just the bulb--but you usually have to replace the entire light assembly. Alternatively, there could be a problem with your burner sensor (stuck open or closed) or your indicator light circuit.


Good luck !!

Regards
PCmania

Unplug or flip breaker to the range. Remove wire around glass bulb protector by sliding one side out of clip while holding onto glass protector so it doesn't fall into the oven and break. Unscrew old bulb, replace with new one. Hold glass bulb protector over the bulb and hook wire back into its clip. Voila! Back in business. (I didn't unplug it, but discovered that you can't turn off the bulb, so it shines in your eyes while the oven door is open. Also, very stupid thing to do, since the bulb could very easily have broken in my very clumsy hand and given me a bad shock. So do it right, and unplug!)

Hi I have a older GE that the oven won't light. It is a gas range that is electric ignited. The top burners do work but the oven will not light. Is it pricey to have this fixed?

no gas flow sounds like a bad gas regulato on the stove. as for the 5 year old ge profile with ignitors not working, you need a part called a spark modual