Remote codes for dish remote for 40" TCL TV

Universal remote codes can vary depending on the brand and model of the remote control you are using. TCL TVs are often compatible with various universal remotes, and you can typically find the codes in the remote's manual or on the manufacturer's website. However, if you don't have access to the manual, you can try the following steps to find the code:
1. **Automatic Code Search:**
- Turn on your TCL TV.
- Point the universal remote at the TV.
- Press and hold the "Code Search" or "Setup" button on the remote until the LED light turns on.
- Press the "TV" (or another applicable) button on the remote.
- The LED light should blink once and then stay solid.
- Press the "Power" button repeatedly until the TV turns off.
- Once the TV turns off, press the "Enter" or "OK" button on the remote to save the code.
2. **Manual Code Entry:**
- Find the code list that came with your universal remote or check the manufacturer's website for a list of codes.
- Turn on your TCL TV.
- Press and hold the "Code Search" or "Setup" button on the remote until the LED light turns on.
- Enter the first code for TCL TVs from the list using the number buttons on the remote.
- If the LED light blinks, check if the TV responds to the remote (try turning it off and on).
- If the TV does not respond, repeat the process with the next code until you find the correct one.
3. **Manufacturer's Support:**
- Visit the website of the universal remote's manufacturer and check if they provide code lists or support for TCL TVs.
- You may find an online tool or database to help you find the correct code for your TCL TV model.
Remember that not all universal remotes are compatible with all TV models, so it may take some trial and error to find the correct code. If none of the codes work, you may need to contact the manufacturer of your universal remote for further assistance.

Program Your Cable or Satellite Remote Control to Work with Your TCL Roku TV
Providers Codes for TCL Roku TVs Programming Instructions Comcast Cable (Xfinity) 11756, 12434, 12290, 12292 Comcast Cox Communications 1756, 11756, 12434 Cox DISH Satellite TV 1756, 535, 645 DISH Network Frontier Communications 688 Frontier Communications https://support.tclusa.com/tv-remote-codes/roku-tv-remote-codes

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

TCL Android TV Remote Codes

TCL https://support.tcl.com > us-remote-codes > tcl-android...
Click here to view and download remote codes for TCL Android TVs. Look for your provider and the corresponding remote code, and use the instructions from your ...

TCL Universal Remote Codes + Setup Instructions

The Home Theater DIY https://thehometheaterdiy.com > tcl-universal-remote-c...
Aug 30, 2023 - The Most Common TCL Remote Codes ; CenturyLink, 2414, 2434, 3183 ; Charter (Spectrum), 11756 ; Comcast Cable (Xfinity), 11756, 12434, 12290, 12292.

..

0238,0231,0222,0258. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

go to www.fitness.manualsonline.com or www. remotecodelist.com

God bless you

Hey djeremyc87,

I can definitely assist you in programming the remote to the TV. I was unable to find any codes specific to a TCL TV, though to program the remote we can preform what's called a Power Scan. I have listed the steps below.

Power Scan to TV:

1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press and release the red power button, then press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off.
3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

That will allow you to program the remote to the TV. If you have any additional questions/concerns you can post here or reach me at [email protected]

Tommy Faust
DISH Network

I have the 32" TCL and the 645 code also worked with the 722 dish network dvr remote (remote 20.0 IR). For that remote, press and hold tv button until all device buttons light up, enter 645 and press # key.

Hello, you may have gotten this resolved already, but here are some simple steps to help you out!!!!
Follow the link yo our website and you will be good to go with that remote real soon!!!

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Hope this helps!!

Becki Barned
DISH Network Customer Service

most universal remote would work like this... press butons tv and power on at same time till red light of remote lights still. then press 110. then presto, it works... i hope i help in a way.