Thank you for contacting Fixya.
Please follow the instructions given below to troubleshoot the power issue:
1. Connect the printer directly to the power outlet. Surge protectors can actually draw power away from the printer. If this fails, please try multiple power outlets to ensure your specific outlet is not damaged, and make sure the printer is not connected to the PC while testing the unit.
2. When trying to power on the printer, feel the power supply box (if there is one) and note whether or not it is warm. If it is warm, the problem is not in your power supply, but most likely in your printer. If it is cold, the power supply might be defective.
3. Ensure you have the correct power supply connected to the printer.
4. If you have access to a voltmeter, please ensure that the power supply is giving out the correct amount of voltage (most of our printers use 30 volts output).
Your's tech support
Jeeth
SOURCE: Lexmark X5470 printer
Download the Vista drivers from the Lexmark website. If the printer still doesn't work, uninstall windows Vista and put 2000 or XP.
That will avoid a lot of problems and your PC will run amazingly fast.
SOURCE: Lexmark x5470 not detecting ink cartridge
If it's not put in just right it will stay on, this has happed to me before and I had to get two ink cartrides be for it worked.
SOURCE: how do i connect my lexmark x5470 with out cd software
If you do not have the disk you must download the software from Internet, follow instructions below,
Click here:Official Lexmark Drivers and Software
A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if
you get in troubles, follow
the instructions below to reset and reinstall drivers:
SOURCE: For our Lexmark x5470 All-In-One Printer we are
Hello,
Overview for Lexmark 5400 series:
http://www.lexmark.com/publications/pdfs/2007/5400/en.html
See set up sheet (page 1):
http://images.lexmark.com/publications/pdfs/2007/5400/setup-sheet-en-es.pdf
Try to rebrick you printer by pulling out power supply, black box where the
power cord is plugged in at the back of the printer, and put it back after 30
seconds. This will reset your printer.
If that doesn't help, try to plug your printer into a different known working power outlet.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.
297 views
Usually answered in minutes!
my lexmark X5470 printer power button does not works - any sujest what to do?
I have the same problem
thanks
but all uou writing her i did it befor i posteded the messege
evry thing it ok but it still not warking!!!
any sujest what to do?
i did all what you are writing her and its ok but it still not warking yet!
any sujest what to do?
thanks
eli
I have a lexmark X5470 and it has a red light that is on in the machine but the machine it self will not turn on. Got any ideas
×