My mouse dont want to move whan i open NFH2 - JoWood Productions Neighbours From Hell 2 for Windows

Aah ! i have the same mouse and i had the same issue. Apparantly, a new update has solved this problem. Check out the link below !
TteSPORTS BLACK

Open "Google Chrome", click the "Settings" icon located at the top-right corner of the Google Chrome (it looks like a spanner), move down your mouse and then click "Tools", again move your mouse towards the sub menu, locate and click "Extension", a new window will open up with all the lists of extensions installed on it.
Here's the illustrated screenshot..



Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

try cleaning the sensor reflector b4 opening the mouse(its the light thingy @ the bottom)
if it doesnt work try opening with a screwdriver,normally covered by a sticker at the bottom of the mouse

I assume you mean the mouse built into the laptop? If so it's likely that there is a connection short circuiting when you apply the pressure to the right side. There is only really two ways to test this
1) Try installing another operating system and see if it happens
2) Open up the laptop to have a look.

If the laptop is in warrenty then go through the warrenty, dont open it up or let anyone else (even qualified technician) open it up as that will void the warrenty.

There should be a button on the part that plugs in and flashes. Press it, then press the button on the mouse (usually on the bottom & well hidden-you might even need a pin point to set it). Once the button on the mouse has been pressed, the flashing should stop and it will light only when the mouse moves.Repeat for the keyboard, if necessary.

just open ur mouse
and clean it with cotten
and u will never got thsame problem.....

run a virus checker i had a similar thing happen to me hope this helps regards Jim

Windows has inbuilt driver for all the mouse. YOu dont need to install the driver separately for your PS2 or USB mouse.
The reason why yours is not moving can be
1) Mouse cap/IC gone bad & needed to be changed a new mouse
2) OS faulty (very rare 1 out of 100)

what type of mouse do you have a ball or laser
can it move off the mouse pad
if its a laser dont use a moust pad

Look for the start button and turn it on /It should start right up.

No you dont have to have a mouse to use the arrows, u have to use your fingers to move the arrows to what u r want to click on.