Jenn-air jmv8208bas e-11 error code

On a GE or Hotpoint, it usually means the keypad is defective. On some other brands, it means there's a sensor error.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

If you wish to get some details; check the site linked here. Pull up older posts.....
http://electro-medical.blogspot.com/

http://kitchen.manualsonline.com/manuals/mfg/jennair/jmv8208bas.html?idProd=1511577 Free Jenn Air JMV8208BAS Microwave Oven User Manual ManualsOnline com

I would first suggest checking the bottom door switch and its mount.

See these help files:
http://031d26d.namesecurehost.com/mwd/safety.txt
http://031d26d.namesecurehost.com/mwd/disassembly.txt
http://031d26d.namesecurehost.com/mwd/doorsw.txt

The full service / installation manual is here.

If it's not a switch issue, you may have a sticking relay on your control board, which can be economically repaired. Details are here.

Hi, my name is Audrey and I am a Jenn-Air employee. I would appreciate the opportunity to assist you with your microwave. Please send me an email through our customer service address,

[email protected]

and type 'Attention: Audrey' in the subject line. Please include your full name, phone number, and model/serial number, and I will look into the issue for you.

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for about 5 minutes. Then let us know if the hard reset does not fix it.

The owner's manual is online here and it covers the child lock:

To set the child lock.
Touch and hold
ENTER/START
pad more than 3
seconds. CHILD
LOCK ON will
appear in the display
window with two
beeps.

To cancel the child
lock.
Touch and hold
ENTER/START
pad more than 3
seconds. LOCKED
will disappear and
you hear two beeps.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

You can try repairclinic.com. Just enter the model number of your oven and it should list the part number as 1068482 with the price as $10.45 plus shipping.

SE error means you have a shorted membrane keypad.

On some models, you can replace just the membrane keypad, which is very inexpensive, but difficult.

On other models, you can replace the plastic control panel frame, which comes with a new keypad already installed.

If I knew your full model number, I could give you the part numbers, prices, and links you need.

Feel free to contact me directly (and include your full model number from the tag on the unit) for more free information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Here is a link to the manual for the model number you have chosen.

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%208112P305-60.pdf

Look for a reset button on the back--push to reset. If trips again, unit has probable short.