Capacity of Kenmore Model: 110-9155120 Washer and 97566200-75662

4 cubic feet

used set maytag -washer pav2300aww and dryer lde4916ade

https://maxappliances.ca > Shop
SET by MAYTAG WASHER MODEL: PAV2300AWW DRYER MODEL: LDE4916ADE The washer has a capacity of 3.6 cu ft. The Dryer has a capacity of about 4.0 cu. ft.

Is it super, extra large, or large Capacity. Kenmore washers that old were 3,2 cu ft for super Capacity. 2.7 for large or extra large.

http://www.managemylife.com/mmh/owner_manuals/14772/KENMORE-ELITE-Residential-Dryer-L0606300?brand_name_search=kenmore+60+series+dryer+capacity is for the dryer.

http://www.managemylife.com/mmh/owner_manuals/12077/KENMORE-ELITE-Residential-Washers-L0606295?brand_name_search=110.27082601 is for the washer.

That growl is the motor bearing. The replacement is not difficult. The blower is reversed threads. I have repair photos HERE

The washer is an 18 pound (dry weight) capacity


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Use the sears parts website, and you can download the manuals for both machines that will tell you.

CLICK HERE

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.

post model number please

It appears your motor/motor controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Starting in early 2002, the capacity sizes were changed around a little bit. A normal sized washer now all have the same sized tubs (pretty much) in the 110 series (Whirlpool Manufactured) washers. The capacity is now rated somewhat by the agitator action the washer comes with. Depending on the type of agitator you have, will determine the capacity. King size capacity means you have a pretty good capacity (size wise) than others. You have normal capacity, large capacity, super capacity, king capacity, and I even think they have canyon (yes canyon) capacity. Capacity sizes dont really mean to much though. In order for you clothes to get clean, the must have room in the tub to move. The must be able to float up, then get pulled down by agitator action. That should determine the size of what goes in the washer. Always use same type clothing when doing laundry (i.e. towels with towels, sheets with sheets, etc, this will keep the load balanced better). Watch what you load, comforters are ok (per manufactures ok) but I do not tlike the idea unless its a front loader, and only by itself. Let me know if this helps you out any.