The problem is it (remote) won't work- changed batteries 4 times and I can push buttons till my fingers are sore and it won't budge! Then the next time it will for like 3-4 pushes, then stops working! I want a new remote! Except I can't find ANY info on who to contact! Beyond p*****d.
This sounds like a lie, but 1234 works. It's for something called iNet, but I was scouring the web for a code because the remote that comes with iKonvert sucks. I finally found it in the pamphlet.
SOURCE: Remote Codes for Digital TV converter remote do noy work
try:0607-0204-0321-0508-0326-0993-0802-0108-0308-0715-0463-0053-0606-0653-0508-0160-0371-1172-and finally 1253.
Please rate!
SOURCE: zenith digital converter DTT 901
Hi, I know there are a lot of them below, but i didn't know if you needed 4 digit or 3 digit code so i stacked 'em all here. Hope one of them work, sooner rather than later! :-)
Hughie.
4 Digit codes.
0121
0009
0050
0078
0091
0138
0059
0131
0038
0111
0134
0153
0064
0004
0135
0226
0227
0247
0266
0288
0310
0338
0358
0023
0039
0001
0058
3 Digit Codes.
406, 408, 423, 437, 439, 440, 441, 442, 443, 444, 445, 447, 471, 486, 488, 503, 517, 519, 520, 521, 522, 523, 524, 525, 527, 533, 656,
050, 059, 078, 131, 482, 483, 494, 507, 554, 555, 566, 562, 563, 574, 587, 595, 615, 617, 634, 635, 646, 656, 001, 004, 009, 023, 038, 039, 050, 058, 059, 064, 078, 091, 111, 121, 131, 134, 135, 136, 153, 226, 227, 245, 247, 252, 266, 288, 310, 338,
358
SOURCE: Remote control code for an APEX digital converter
If that code is not listed in the little booklet that comes with the remote control then it's probably not capable or controlling the APEX converter. Most of the universal remotes can't accommodate digital converter boxes. The only possibility is doing a search for the code manually as instructed in the booklet. I suspect you won't find anything that will help you out except getting the original control from the Manufacturer or replacing the entire box and you will get a new remote control with it.
This is a problem I have run into before, the universal remotes people just don't have access to the digital converter codes. They are proprietary and vary from model to model and brand.
Zashiban
0865,0948,0823,0432,0886 are the codes to check. If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"
SOURCE: I can't find any universal remotes that will work
It seems to be very difficult to get a code for this device. I too ahve searched many sites. The brand name you states here is not a standard one; I assume.
Just try the sites I linked here. Good luck.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
2,176 views
Usually answered in minutes!
This sounds like a lie, but 1234 works. It's for something called iNet, but it works
×