Lacrosse wrist watch xg55 light does not work

This watch must be returned to Casio service center for servicing, pressure test and complete tune-up.

Hopefully, this will help...

Lego Watches Manual Instruction:
There are 4 buttons on this lego watch case, Light button, Mode button, Stop button and Reset button, now I will show how to set the time easily!
1, Light Button: Press this button, the watch LCD light will display for 3-5 seconds;
2, How to use the stopwatches chronograph function?
Answer: When the lego watches in normal working condition, Press "Stop button" for 1 time, then the watch goes into the chronograph mode, then you can use "Stop button" and "Reset button" to operate this function.
3, How to set the alarm time?
Answer: When the lego watches in normal working condition, Press "Stop button" for 2 times, then the watch goes into the alarm mode, then you can use "Stop button" and "Reset button" to set the alarm time, also you can turn off or turn on the alarm function and chime on every hour function by the same operate.
4, How to set the right watch time, hour, minute, second, week, date, month, year?
Answer: When the lego watches in normal working condition, Press "Stop button" for 3 times, then the watch goes into the time setting mode, then you can use "Stop button" and "Reset button" to set the second, minute, hour, week, date, month and year.

This is all. So now please have a try to set your lego watches time!

One of them is the seconds hand of your watch, this sub dial will keep on moving even if the watch is not used as a stop watch. the other 2 sub dials are for the stop watch function. one is for tracking the minutes and the other is for hours. the big seconds hand will only work if you use the stop watch function. you can reset your stop watch to zero by pressing the pusher located at the 4 o,clock location of your watch.

On Leap Years, the function dial is to be set to '0'.
Add one for each year after...
So, for 2011, set the function dial to '3' since it has been 3 years since 2008, the last leap year. Next year it should move/be set to '0' again since 2012 is a leap year.

http://world.casio.com/wat/download/en/manual/
?
There are so many aplications use of the manual will be manditory.

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps
R/
David
http://antiqueclock.clockstop.com/

Here is the manual for your watch. It tells you how to calibrate the compass. Print out the manual and keep for future reference.

http://www.lacrossetechnology.com/xg55/manual.pdf

Good luck. Did this help you?

one of them is the seconds hand of your watch, this sub dial will keep on moving even if the watch is not used as a stop watch. the other 2 sub dials are for the stop watch function. one is for tracking the minutes and the other is for hours. the big seconds hand will only work if you use the stop watch function. you can reset your stop watch to zero by pressing the pusher located at the 4 o,clock location of your watch.

pull the crown out and use the top and bottom buttons to zero out. when pull the crown out each position set a differnt dial

You can download a manual from Casio that should tell if and how the radio function turns off.

http://world.casio.com/wat/download/en/manual/

If your watch has any kind of illuminated dial or dial light, you may have found the battery for that instead of the one powering the watch itself. I have one similar and did that same thing only to find that the watch still wouldn't run.  The battery that powers the illumination is larger and in my watch, the battery for the watch portion is half the size and located below and to the side of the other cell.