Motherboard Simple PCI Communications Driver Code 28 for modem

This is a modem or network card. You must... Never mind.


Here it is.http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=820&MenuID=21&LanID=0

Access the manufacturer's web-site: http://www.asrock.com
Enter the model-number of your motherboard, and do the search for downloadable device-drivers.
Look for the "network adapter" or the "modem" device-driver for your "unknown" communication-device.

Hi, yes you need the right driver, do a google search for the driver, there are many sights where it will be free.

Hello.

When you performed the Windows XP install, not all the drivers were available and installed.

To find and install the driver for the simple communications controller:

Go to Device Manager and click on the pci simple communications controller


Go to Properties and then Details. You will see a code like PCI/VEN_8086&DEV_27D8&SUBSYS...
The VEN code means vendor and the DEV code means device: in the example the vendor is 8086 and the device is 27D8.

Once you have the two codes, go to www.pcidatabse.com. Enter the two codes and you should get the name of your hardware.

From there, you can search for a driver download for your hardware.

Hope this helps.

Look for the brand name of your modem and model. You can find it in the box of the modem. If you have it then go to there website in the internet and download there the driver.

your computer need to install the drivers for modem. because the simple communication controller name is used for the modem

you will need to rinstall its drivers, insert your motherboard CD and reinstall the network adapter. then reboot

Try this link: http://partner.atheros.com/Drivers.aspx

You might be able to find something here.

i cannot get the sound from the TV tunercard as the PCI simple communications controller in the device manager is showing yellow question mark

Hi, I have a solution. If you go in device manager, click on the pci simple communications controller, go in property and then go in details. You will see a code like per example PCI/VEN_8086&DEV_27D8&SUBSYS...

The VEN code means vendor and the DEV code means device: in my case the vendor is 8086 and the device is 27D8.

Once you have the two codes, go to www.pcidatabase.com. Enter the two codes and you should get the name of your
hardware. From there you can search for a driver download for your hardware.

In my case the pci simple communications controller was a Microsoft UAA Bus HD audio. I also had another pci
device that didn't work properly, using the same method I found out that my pci device was an HSF PCI internal modem with code number CX11252-11. I had a hard time downloading one of the drivers, after 6 or 7 times the download started so be patient if you have the same hardware
.
NOTE: to access the device manager, go in control panel, then performance and maintenance, system, hardware and finally device manager.

Hopefully this helps you, good luck.