I have looked online and even went to HomeDepot and asked them for help. No one knows how to get at the light bulb. There are no tiny screws to remove. No knob at the base of the globe. The globe itself doesnt budge even when sprayed with wd40. I dont know if I am going to have to just break the globe off or if I am missing something. The model number on the fan only said 48TP. ANY SUGGESTIONS?
Twist counterclockwise (looking up at it) on glass firmly and carefully, the globe functions like a screw
I have the same problem. I have turned and turned the glass globe clockwise and counterclockwise slowly and gently at least 50 times. no drop off. I have even taken every screw out of the fixture and body to inspect the insides exposed and have had no luck. Fitting the wires (breaker off!) back inside the ceiling hole was a task!
I'm at a loss... Please help.
Have you tryed unscrewing the globe. Have run across this before. Might be VERY tight but it can be unscrewed. Just be ease and keep working it back and forth. Let me know this turns out.HAHAHA.
I couldn't figure it out either until I just pulled straight down and twisted it off. There are no threads, just 3 metal clips inside globe that hold it on with tension.
Be patient. This turned out to be not an easy task. I sprayed around the top of the globe with WD-40. Waited a few seconds then turned the globe to my left (looking up). It came off. Mission accomplished!
Turn the globe 1/4 turn clockwise & it will come right off. it may be tight so be careful.
How do you change the bulb in a Hampton Bay Saguro 4-Light Russet Fluorescent Ceiling Flushmount HBF1330-280
30,618 views
Usually answered in minutes!
×