At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Keyless entry Thought it was battery as it wasn't blinking red so tried spare which does blink red and still doesn't work. Tried to reprogram and that did not work. Has been working fine until today.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1
Insert your key into the ignition. Turn the key forward until it can go no further, without starting the vehicle.
2
Press and hold the "Valet/Override" button located under the
dash. Hold the button until the blinking LED light on your dash is
solid. Switch your "Valet" button to "Off" if you have a button labeled
"On/Off." Your alarm should now be reset. If you wish to enable the
alarm, repeat these steps to turn the alarm back on.
3
Remove wires from your battery if you wish to temporarily
turn off your alarm. Disconnect the wire connected to the main power
source to permanently disarm your alarm. Trace all wires connected to
your battery and disconnect them. If you have no familiarity with your
vehicle's wiring, you should take your vehicle to a neighborhood
installer to disconnect the wires for you.
Disconnecting the battery erases stored memory,after you connect the battery put the key in the ignition cylinder and turn the driver door switch on(open) and off (closed), on (open),the entry,exist function then becomes complete, and the return operation can be operated,
Does the spare remote work? Have you tried to reprogram it? These remotes are very cheaply made and prone to key pad failure. To program the remote click this LINK, if that doesn't work buy anew one on eBay for cheap.
Try to have your remote re-programmed. You must go the the car brand you have. All electronic can have malfunctions.
Also check if you have good enough batteries in your remotes. If new batteries does not help, re-program the controller.
You should have it scaned to see if you have any codes. It has a RCDLR (remote control door lock reciever) this is the module that recieves the signal from the fobs. If it has a problem then the system will not work. If it has to be replaced then a dealer will have to program it for you. Good Luck
The remote is fine - your problem is the lock actuators in the doors. They're a bit of a pain to replace - so, you may want to have a professional do it.
×