La Crosse Radio Controlled Atomic Clock Logo

Related Topics:

Posted on Jun 17, 2017

Digital Atomic Clock WIll not receive signal or outdoor temp

I have 2 La Crosse digital atomic clocks. One is a wall clock and the other is a small projector alarm clock. At one point I had them both set to the same receiver, then I moved the wall clock and it lost the signal. So i reset both clocks and the receiver. The alarm clock still works fine, but the wall clock has never received a signal since (Time or Outdoor Temp). I followed the manual instructions, ensuring i reset both clocks, still no luck. please help

  • pas1541 Apr 11, 2009

    I have several of the laCross systems and ther all lose the out side signial more ofter then not . Have replace batteries so mant time I've lost count.

×

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Feb 17, 2008

SOURCE: La Crosse atomic clock model #WT-3143

don't push any buttons at all untill the clock has at least 15 minutes to communicate with the transmitter.

Ad
odysp

Cyprian Amaechi

  • 1 Answer
  • Posted on Nov 19, 2008

SOURCE: atomic clock reception

I guess the battery has run out on you. change the battery and you are good to go. I got to warn you though, if you are skittish on taking a good risk, do not try to change the battery yourself. It is a little piece of complex machinery. I have the same problem a while ago. I decided to change the battery myself after the watch repairman tried to sell me a new watch. And you know what, I'm glad I did. My atomic watch is working fine again.

Anonymous

  • 3 Answers
  • Posted on Jan 15, 2009

SOURCE: 3M Precision Digital Atomic Wall

After replacing the transmitter batteries several times, I tried replacing the clock batteries. They must have been getting low. Once I put in new batteries in the clock it worked fine. Good Luck.

Anonymous

  • 714 Answers
  • Posted on Feb 15, 2010

SOURCE: AI can't figure out how to set the atomic clock

This clock will set it's self in a 24 hour time frame. You need only set the time zone your in.

If it does not correct it;s self change walls and location in your house.

The transmitter is located in Fort Collins, Colorado. this station transmits the time codes and is best received at night.

Hope this tip helps.

R/
David

Anonymous

  • 2761 Answers
  • Posted on Mar 19, 2010

SOURCE: I can't get my atomic wall clock to set on daylite La cross wall

The easiest way to reset it would be to change it to Eastern time - that will give you the correct Central DST.

Bill B

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

La Crosse Model W86111, Setting

an atomic clock ........ no user manual ?

1 Digital Atomic Wall Clock Model: W86111 ' Quick Setup Guide

pdfstream.manualsonline.com/0/0a0678fd-f9df-4e8f-8c98-0b4794c5453c.pdf

User-Manual

content.etilize.com/User-Manual/1031159306.pd


26317196-dz0hez40bltko3jrerxnoz1i-3-0_0.jpg
Oct 19, 2016 • Home
0helpful
1answer

OUTSIDE TEMP SENDING UNIT GOT WET AND WILL NOT CONNECT TO CLOCK. HOW CAN I FIX OR HOW CAN I REPLACE?

[PDF]WS-8117 ATOMIC CLOCK WITH OUTDOOR WIRELESS ...

https://www.lacrossetechnology.com/products/.../misc/8117-manual.pdf
NOTE: Do not set the clock until the outdoor temperature is displayed. .... The unit will still try and receive the signal every day despite it being manually set. ..... sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes ... Beforesending the atomic clock in for repairs, contact La Crosse Technology.

La Crosse Technology Top Solutions

https://www.lacrossetechnology.com/support/top_solutions.php
A: Complete a restart for display with the temperature/humidity sensor: ... to rest for 15 minutes can result in failure to connect with the outdoor sensor or missing ... Products set outside of these time zones will not search for a WWVB signal as it is ... locate the Clock or Weather Display near an outside wall and point the unit in ...

Common issues weather stations: Click Here

www.weather-station-products.co.uk/faqs/common-issues-weather-stations
Under £30 £30-£75 £75-£125 From £125 Birdhouses/Feeders Outdoor Clocks ... I'mnot getting any outdoor readings from my outdoor sensor, what do I do? This willcure 90% of all sensor connection problems, important you must ... is the airtemperature, to get this reading you need to place the unit away from direct sun.

Replacement Temperature Sensor ' AcuRite

www.acurite.com > All products
0helpful
1answer

How to set the atomic clock

http://www.lacrossetechnology.com/products/resources/misc/8005-manual.pdf
0helpful
2answers

How to set a Model:WT-8005 atomic cllock

download the manual from here: http://www.manualslib.com/manual/533191/La-Crosse-Technology-Wt-8005u.html
0helpful
1answer

Lacrossetechnology

Hi Susuan,
One of these methods below should get your device working properly. Good luck!
LaCorosse Tech Support email address.
The product information page
From the manual:
915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE SENSOR
The atomic clock will receive the temperature data within 3 minutes. If the temperature data is not being received 3 minutes after setting up (the display shows "- - -"), then please check the following points:
1. The distance of the atomic clock or outdoor temperature sensor should be at least 6 feet (2meters) away from any interfering sources such as computer monitors or TV sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception.
4. Neighbors using electrical devices operating on the 915MHz signal frequency can also cause interference.
Note:
When the 915 MHz signal is received correctly, do not re-open the battery cover of either the outdoor temperature sensor or atomic clock, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur.
The maximum transmission range is 330 feet (100 meters) from the outdoor temperature sensor to the atomic clock (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see Setting up).
Not finding what you are looking for?

1,066 views

Ask a Question

Usually answered in minutes!

Top La Crosse Home Experts

Cindy Wells

Level 3 Expert

6688 Answers

John
John

Level 2 Expert

510 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a La Crosse Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...