Ps2 connection on a sharp aquos

Channel three or channel four or get a CRT TV then to play your PS2 console.

Yes you have to go into the menu go to options make sure input 4 is seet to PC, now push input on the remote go to input 4 there you go.

I had the same issue with my Sharp Aquos 52 inch LCD TV. I called Sharp. The tech had me unplug my TV, take the batteries out of the remote (TV remote not cable) and press all buttons on the remote (including the buttons under the flip top at the bottom of the remote). I did this, put the batteries back in and plugged in the tv and everything worked. I had gone 4 months having to use the surround sound for volume and turning the TV on and off by hand. This took 2 minutes to fix.

Audio out of your PS2 RED and WHITE connect it to your Audio in of your TV and Video out of your PS2 YELLOW connect it to your TV's Video in. YELLOW.

You may be connecting your PS2 with a different cable connection than you used previously.  If this is the case, reconnect the PS2 to the last television that it worked on and change the video connection settings to what your next television is using.  Then power the PS2 down and move it to the next television.  The picture should be fine now.

have you tried hooking the tv cords from the ps2 directly to the tv?

my playstation2 says please insert a ps2 or ps format disc and there IS a cd

It could be the PS2 connector port.
1) Try cleaning it. Maybe used compressed air or just blow into the faulty connector port.
2) Something more challenging, is to maybe open up the PS2 and to search for any broken connections between the Ps2 controller port, and the Motherboard of the PS2. Use a phillips #0 or a phillips #1 screwdriver, flip the ps2, you will see all these tiny squares, pull them out using something sharp, and underneath them there will be the screws, also there are some screws located underneath the warranty sticker and another underneath the Info sticker, just probe the surface until you land upon a hole. there you will find the screws. Open the ps2 up and you will spot the connector and search for any broken connections. any broken links can be fixed just by using a soldering iron and some solder.( OPENING UP YOUR PLAYSTATION VOIDS YOUR WARRANTY).
3) IF your ps2 is still under warranty, you can send it back to sony, or one of their many repair centres around the nation( IF U ARE IN THE USA). If in another nation, you can visit sony.com and follow their instructions on how to go about with in warranty repairs

Criminy! This is amongst it's several fatal flaws. I strongly suggest that you RUN, DO NOT WALK-- back to where you purchased it, and get your money back. Then, coffee in hand, sift through a few "Consumer Report" type ezines & find a better model to own!

Yes, But you need to purchase an other type of adapter, the one that connrcts to your cable in plug.

good luck------------------tomtaso