Temperature control show code CE model GLFU2067FW4

CE probably means a Communication Error between the high and low voltage boards of the freezer. First check if your freezer uses a 9V backup battery and replace that with a new one. Next check the wiring for corrosion or damage. Check where the wires connect to the boards and inside the door. (Note: the high voltage board controls the compressor.) You may want to check that the freezer is holding the correct temperature with a refrigerator/freezer thermometer.

Please add a comment with the model number of the freezer (including the three digit prefix) if you'd like me to check for a parts diagram and parts list.

I hope this helps.

Cindy Wells

Hi, go to this website and it will tell you what your error code means. Thanks!
Kenmore Freezer With Deluxe Electronic Control

Search Results

Freezer electronic temperature control manual... ' Sears ...

www.searspartsdirect.com > Ask an Expert
Jul 5, 2012 - I have a Kenmore elite freezer with electronic temperature control. ...my freezer was delivered yesterday, the control panel is stuck on of, ... an electronic control on front. the display is showing hi temp and door ajar. also an l in ...

Control Panel is not working right - Samsung

www.samsung.com/sa_en/support/skp/faq/239315

Samsung ElectronicsSep 3, 2015 - In case of wrong temperature display, possibly door opens so inside ... If the control panel is still not lit up after you plug the refrigerator back in, it may ... When initial installation, Temperature will show current temperature for a ... When the refrigerator/ freezer reach the set temperature, the blinking will stop.

Adjusting Side-bySide Refrigerator Temp Controls - Actual ...

? 3:50
https://www.youtube.com/watch?v=DFzTGKVo79g
Jun 27, 2010 - Uploaded by GE Appliances
CAN I TURN OFF THE DIGITAL CONTROL ON FREEZER AREA ONLY. ... I need to know How to reset this kind of refigirator, same front panel ... When you try to set the actual temperature, does your control show your new ...

Electronic Temperature Controls - ManualsLib

Well, no, actually. P2 is an error related to the evaporator temperature probe. I would start with the electrical connections, the bond between the probe and the evaporator, and the evaporator fan.

Hello Warner, thank you for your post!

Typically when a freezer displays "OFF" it means that the temperature control is in the off position. When this occurs the temperature control turns off the compressor, but does not disconnect the power to the light bulb or other electronics. Let's try re-activating your freezer by pressing the UP arrow until display shows "4" or desired setting. If the issue persists, then the freezer could possibly be experiencing a communication issue with the control board, temperature control or a potential wiring failure. At this point, I suggest reaching out to an appliance expert who is best equipped to pinpoint the exact problem.

Best of luck!

You have a bad freezer fan and need to replace it. The fan is located behind the back wall INSIDE the freezer. The unit will warm up a little because the air wont circulate the way it is supposed to. You can try unplugging fridge for 30 seconds to reset the control board u can do it yourself although I don't recommend it because u need actual diagnosis but this seems it hope it helps try buying part from sears or amazon

Hello gorog52 - From what you have described and the upright freezer keeps displaying OFF, you possibly have a communication problem with the electronic control assembly. I recommend contacting a professional to accurately diagnose and repair the unit.

change out the main control unit.there could also be a crossed or shorted wire in the door and this can not be fixed

http://www.managemylife.com/mmh/owner_manuals/370/KENMORE-Upright-Freezer-L0805601?brand_name_search=Kenmore+freezer+2532846.2801
try this web site that has a copy of a manual for this freezer. See if this has what you are looking for.

Some freezer models feature a temperature
monitor that provides an audible
alarm. The temperature monitor alarm is
located near the temperature control

The alarm sounds if the temperature in
the freezer rises 10° F (12° C) or more
above normal for selected setting. Alarm
may sound if temperature control dial is
turned to a much colder setting or if a
large amount of unfrozen food is added at
one time. Alarm is controlled by a three
position switch



• 0 = OFF prevents alarm from sounding
when freezer is warm, such as during
initial start-up or defrosting.
• ✓ = TEST sounds alarm regardless of
temperature. Alarm system should be
tested at least once a month.
• 1 = ON is proper setting for normal
freezer use. Return switch to 1 after
defrosting.