Nabi 2 camera not working

1. Turn off your nabi Big Tab.
2. Press the Volume - button first, then press the Power button and hold them both until the system menu appears on the upper left corner of the screen.
3. Use the Volume - button to highlight "Recovery Mode," then press the Power button to select it.

More items...

I Need to Perform a Factory Reset on My nabi Big Tab

https://www.nabitablet.com/.../nabi.../i-need-to-perform-a-factory-reset-on-my-nabi-big-... How do reset the nabi tablet Google Search

Cannot get Wopad to turn on sometimes ' Android Tablet Forum

www.androidtablets.net > ... > Rockchip RK2818 Tablets

Dec 28, 2010 - 11 posts - ‎9 authors
It would do this in seconds. the screen would just turn black, like it does when you tap the .... Hi do you know hw to reset the wopad and how to eliminate this *process ...Now I can always turn it on, even after a long standby.

reset nabi 2 tablet if pattern lock forgotten? - Android Forums at ...

forums.androidcentral.com/...tablets/248800-reset-nabi-2-tablet-if-patter...

Jan 31, 2013 - 9 posts - ‎8 authors
How do you factory reset the nabi tablet 2? My child put ... Turn off your Nabi (To turnoff Press and hold the Power button for 3 seconds) then tap OK 2. Press the ... From your screen press the Volume ? (Low/Down) then the Volume + (Up) button. 5. Press the .... These Before & After Couple Photos Just M..

Sounds like you have a good charger/cable, so try resetting the Nabi that's giving you trouble. Hold the power switch down for 10-20 seconds to reset the unit.
I have a couple of NABI-2 tablets and they both react differently to the charging cables; I often have to shut the NABI off completely to charge them. Also, getting the charging cable to connect can be challenging - I will plug the cable in and out several times waiting 10 seconds or so to see if the green LED will go red.

Best bet is to reset the Nabi...hold the power button in for about 8 seconds. The tablet will shut down and restart. Unless you've dropped the Nabi (hard, my kids drop it often) it should restart and behave.

Try to reset it by holding down the power button for 7 seconds or so, then release and start as normal.

sounds like your screen broke. Nabi has 2 'scereens' a piece of glass on top, then the LCD screen below. The LCD screen can be broken by hitting or twisting it. It can also become more prone to breakage if you leave it out in excessive heat.
Nabi will fix the screen for about $60...

I fit is a new tablet, I would take it (/send it ) back to supplier and complain and/or ask for a replacement.
If it is not new, then... hmmm.

https://www.askmefast.com/My_Nabi_screen_keeps_flickering-qna5946535.html

Hi,
It is failure of ccd imager chip in your Sony DSC-T1 camera and Sony will repair it free of cost.
Click Sony CCD Imager Support for details.

Hey Wistra,
You could try resetting your camera to the factory settings by choosing the reset to default setting in the menu. If this doesn't work the sensor on the camera is most likely broken, and you should have the camera looked at by an authorized service technician. If the camera was purchased less than a year ago the repair would most likely be covered under manufacturers’ warranty. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.