Free download for iriver E100 vedio player installation software

The iRiver E100 uses iRiver Plus 3 to manage music, pictures, and more. iRiver Plus 3 can be downloaded for free here:

http://local.iriver.com/mas/download/downloadView.asp?selectPart=cateCode&findWord=01&sno=852&page=1&cateCode=01

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

The iRiver E100 uses iRiver Plus 3 to manage music, pictures, and more. iRiver Plus 3 can be downloaded for free here:

http://local.iriver.com/mas/download/downloadView.asp?selectPart=cateCode&findWord=01&sno=852&page=1&cateCode=01

1. Insert the installation CD into your PC to display the installation process screen.
2. Select iriver plus 3 and click the Install button.
3. Complete the installation process by following the on-screen instructions.
4. Turn on the iRiver E100, and then plug it in to the computer using the USB cable.
   
5. Open iRiver Plus 3.
   
6. Select the desired files / folders in your PC and drag & drop Music, pictures, etc. to the drive which appears as the product.

If you would like, there is a manual available here:
http://211.39.137.201//download.asp?filename=2008111114270150302.zip&filepath=/file/Down/

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

www.iriverinc.com/plus3/download.asp

www.brothersoft.com/downloads/iriver-software.html

www.myzips.com/result.phtml?keyword=iriver

Try Wondershare DVD Ripper Platinum, the problem due to the codec of your ripping program.

Hello,

To the iRiver support site:
http://www.iriver.com/flash/index.asp?code=0302

In the top page right corner enter "E100" and all support for the E100 player shows up.
Click on the required New Firmware e.g. latest version 1.22 to get more information ( sep 25, 2009 ).
Next click
"-. Customers who purchase E100 can upgrade their players either
by Firmware updater or Iriver plus3".

A page shows up for how to download and install the firmware.
Right click the firmware updater
and select "save target as...", for a place to save the installer.


Getting Iriver plus 3:
In the left column of the support page select Plus 3. Next left click Download iriver PLUS3 and save the execute file iplus3.exe .

Upto my knowledge, IRiver-E100 Supports "WMV" format but there may be some restrictins like bit-rate, frame-rate..(WMV1,WMV2,WMV3..)
There is a vedio convertor available for this, Here
That might help you.
Regards,
Waqar.

Try to official site and see if they can help-

http://www.iriverinc.com/support/

What you need is a free opensource program called http://mediacoder.sourceforge.net/download.htm

I have the settings at home but I think they were these:
Video settings: frames per second (FPS) 24 or 25, 600 KPBS
format Xvid, container AVI, 
Picture settings: 320 x 240 - check the cropper settings you want
In the audio use the Lame MP3 settings no more then 44100 hz (probably 33,000). 
If this doesn't work post me a message and I will get you the correct settings.

Go to the iRiver website: http://iriverinc.com/
Go to the menu "Support" located on top of the page and select the product for which you need drivers.
Hope this helps.

Software / Media Transfer The E100 comes packaged with a disc containing iriver plus 3 media player, firmware updater, video converter, and Windows Media Player 11. If you have owned an iriver player, you are familiar with this software with the included iriver media player. This is a standard media player much like any other but has a few features catering to the iriver family of players, such as a firmware updater, ebook txt manager, and video converter. This media player is a bit different from Windows Media Player but still is straightforward and easy to use. If you don’t care for iriver’s media player you can always use any other MTP based media player to manage playlists and load your E100 since also included on the disc is a video converter and firmware updating utility.
If you don’t like to use media players to transfer the E100 will allow you to select either MTP or MSC transfer mode. This means it is drag and drop and also compatible with any OS. Drag and drop will work fine in MTP mode as well, but only if you are using Windows XP SP2 or Vista.

and the difference between e10 / e100 your guess is just as good as mine