Belt diagram for a ford yt16 lawn mower deck - Garden

If you have a Craftsman, under the seat is the model number. Go Here to get the operators manual. The manual will have all the belt diagrams. Water Filters Lawn Garden Appliance Parts

it's usually on top of the deck clean off the grass and look on top may have to remove it to see

Belt broke on my 0-turn 42"cut simplicityHow do I install a new belt on model#Z2691036 ,SN# 2015904259 hydraulic deck. ?

Type in your model number to your search engine. find your model, and your diagrams will be there.
hope this helps.

try www.johndeere.com apply for user id and password

will need to wait for these to be issued to you via e-mail

then go to www.jdparts.com and enter your user id and pw and enter the correct site for your country and then enter model stx38
scroll through list to find deck or attachments and double click it

your deck could be a yellow or black deck


cheers

GO TO INTERNATIONAL PARTS SITE, ENTER TRACTOR MODEL, SELECT PROPER DECK AND THE PARTS LIST HAS A BELT DIAGRAM BUILT IN. IF YOU HAVE AN INTERNATIONAL BELT FOR IT BEAT A PATH TO A BEARING COMPANY TO ORDER THE SAME OR BETTER BELT FOR LESS THAN 1/4 THE IHC COST.

This is an older model, but the routing might be similar.

Visit this web site http://www.partstree.com/parts/
you can pull up your Cub

Go to ... http://www.partstree.com/parts/ Then click on Cub Cadet, enter the model number on the left that is under the seat and all the different diagrams are there. Click on Mower Deck.

Try http://www.rcpwparts.com/parts.asp