Check kds.log -this is my massage error when i press scan option at canner kodak i 260 "check KDS log" messge error appears when scan option chosen on i40 Kodak Scanner.

fix your wireless or try different cords

Did you use the installation software CD-rom before running it on your new computer? Most scanners comes with an installation CD that you have to install before using it. You may also have to restart your computer before using it after the installation. Good luck.

If lamp has been replaced then press Menu button on remote and select Settings then go to last option Lamp Replacement and follow instructions there.
TV wont show you lamp replacement message any more.

The KDS has an 'OSD' ("on screen display").
Press one button on the front of the KDS to activate the OSD, and navigate through its various menu-items, to find the "reset" control.

there might be a problem with the VGA driver. while booting, repeatedly press F8 until you get the boot options (black screen with white text) with your arrow keys, you select "boot in VGA mode"
then you can easily reinstall the video driver.

My scanner i260 do not scan properly, it present a distortion in the image, Could you help me?

Thanks a lot

ImageCalibration means the cameras don't get enough light during their self test.
Please check the following points:
Are both lamps on or one lamp in case you have a single page scanner?
Are the imaging guides (the clear sheets above the cameras) clean?
Are the little white tags on the imaging guides present?
One tag on each imaging guide.
Without this small white tags the cameras are not able to check themself.
For emergency you can apply a small white paper or white insulating tape instead of missing tags to test the scanner.

If the lamps are light, both tags are present please calibrate the scanner with the kodak calibration sheets. You will find the calibration menue in the scanner validation tool. You can get this tool from the Kodak home page.