Output coming out the back

If you require printed confirmation that your faxes weresuccessfully sent, follow these instructions to enable fax confirmation beforesending any faxes. The default fax confirmation setting is Off. This meansthat a confirmation report is not printed for each fax sent or received. Aconfirmation message indicating whether a fax was successfully sent appearsbriefly on the control-panel display after each transaction. NOTE: You can include an image of the first page of the faxon the Fax Sent Confirmation report if you choose On Fax Send or Send &Receive, and if you scan the fax to send from memory To enable fax confirmation
1.Press the (Setup) button.
2.Press right arrow to select Print Report, and then press OK.
3.Press right arrow to select Fax Confirmation, and then press OK.
4.Press right arrow to select one of the following, and then press OK. Off Does not print a fax confirmation report when yousend and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every faxyou send.
OnFax Receive Prints a fax confirmation report for every fax you receive.
Send& Receive Prints a fax confirmation report for every fax you send andreceive

Hi,

Follow the steps below to enable the Fax confirmation on Sent and recieved.

On the printer :

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
   • On Fax Receive: Print a confirmation page every time you receive a fax.
   • Send & Receive: Print a confirmation page every time you send or receive a fax.
4. Press OK .

Thank you for contacting FixYa


*Please rate this solution with Thumbs Up

Hi,

Follow the steps to setup the Fax sent confirmation report.

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
4. Press OK .

Other confirmation reports in the same menu are :

• On Fax Receive: Print a confirmation page every time you receive a fax.
• Send & Receive: Print a confirmation page every time you send or receive a fax.

Hope this is helpful

Thank you for contacting FixYa.


*Rating and comments invited on this solution

The fax machine that is sending you the fax may be also sending a confirmation page that is not needed or compatible with your machine.

I have an older machine that prints a confirmation page after each fax. People on the other end sometimes receive a blank page after each fax that I send them while my machine prints a mostly blank page with only a single line of text at the top with the date and time.

This is an excerpt of the User's Guide for your machine. You can download from here:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=1138342&


Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after
each transaction.
To enable fax confirmation from the control panel
1. Press Setup.
2. Press 2, and then press 1.
This selects Print Report and then selects Fax Confirmation.
3. Press to select one of the following, and then press OK.

Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.
User Guide 65
Fax
Tip If you choose On Fax Send or Send & Receive, and scan your fax to send from memory, you can include an image of the first page of the fax on the Fax Sent Confirmation report. Press Setup, press 2, and then press 2 again. Select On from the Image on Fax Send Report menu.

Iunplugged the machine for a minute then plugged it back in. Unfortunately, whatever faxes were waiting to be printed were gone and so was the activity log. But it works now.

if its coming from a fax server this cannot be stopped. You should upgrade to a newer better machine that is up to industry standard. Fax servers are basically faxing you from a computer. This is a different process than faxing from an actual fax machine and the page size can be conflicted. Only high end newer machines can compensate for this.

Turn off confirmation/result reports.

When you say all other printing processes are ok, I am assuming you can make copies and print from the computer. If so...then are the blank faxes coming from several different fax machines or are they coming from one particular fax machine. If one particular fax machine, then the problem is probably on their end. I need to go backwards a second....when you receive a fax does the machine spit out a blank page or no paper is fed at all..it just receives the fax? Is the machine programmed to just receive faxes to memory to be printed out later? It doesn't make sense for it to print or copy but not to print a fax. If problem persist try a different fax modem.

Check the link -- if this is the correct device page 44 of the first english manual has the code for changing the confirmation page setting.

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Fax-Printers/Plain-Paper-Fax/Copier/model.KX-FG2451