Under the door there is a seam, there are 3 screws in that seam to remove to access that bottom panel.
Remove the panel, reach up, there is a little "ring" beneath the door lock. Pull this
down, it releases the mechanism.
INT means that the cycle was interrupted. If you unplug the unit
for 30 minutes it should clear when all the electricity drains out of
the control board.
If it doesn't clear it means you may
need to order and replace the front interface control board behind the
control panel.
I’m happy to help further over the phone at
https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
×