BAtt flashing on digital screen although I only

here is manual
http://support.tissot.ch/usersmanual/138-en.pdf

Run the watch through the all reset procedure and calibrate it and you should be good to go! http://support.tissot.ch/usersmanual/138-en.pdf

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals.Rate me, please.

Hi, activate the touch screen, touch the middle of the screen 3 times slowly until you see the OPT in the LCD. press the middle big button on the side of the watch once until you see the 24H screen, then hold down the same side middle button for 5 seconds, the display will then say SYNCRO.

You first move the hour hand with the top and bottom side buttons to 12 touch the middle of your screen to set then move the minute hand to 12 as straight as you can, then press the middle of the screen to set to exact digital time. Thanks Mark ;-)

The Tissot Touch watch is expected to need "SYNCHRONIZTION" periodically. (that is, to synchronize the digital and analog portions.) The Tissot manual tells how to do this. This manual came with your watch and is available online from the Tissot website.

good luck, Rodney

This is the tried and tested solution from this very nice gentleman. Many thanks to him (Ha Bi):

1. Press and hold on to the T button until it beeps
   
2. Touch the middle of the screen to change digital display to unit selection
3. Press and hold the T-button until "Synchronize" comes up in the digital display
4. Use the + button and - button to align the hour and minute hand to 12:00.
5. Click on the T-button again. Congrats, you're done!
6. Enjoy~

Must see blog for all T-touch users

http://myhabi.blogspot.com/2008/10/tissot-t-touch-battery-change.html

Paste this link into your browser:

http://www.t-touch.com/flash.html

1)Close available countries window,
2)Click on T-Touch, then choose Stainless Steel,
3)On the right side of the window click on film tab,
4)In the left box in the window find SYNCRO and click on it,
5)Watch and listen to instructions
6)Smile

Do not forget to rate, please.

SET TIME:
1. Activate Crystal
2. Tap center of screen until digital time comes up
3. Press and hold top button (+) until watch beeps, display will be flashing
4. Use + and – key to adjust time. If several hours off, hold appropriate key and
after first hour passes, only the hour hand will move.
5. Make sure the digital display shows A or P for AM or PM
6. When finished, touch center of screen again.

SET DATE:
1. Activate Crystal
2. Tap center of screen until date appears
3. Press and hold top + button until watch beeps and display flashes.
4. Use + and – buttons to change date to correct one.
5. Make sure to set time first, if you set date first, you run the risk of the date
changing at noon rather than midnight.

I suggest writing to Tissot in both your home country and in the head office in Switzerland. Use both email and paper letters. If you can provide documentation of the attempted fixes that will really help your case. Since you had a history of problems you have every right to ask them to stand behind their product. Perhaps there is a new warranty on the replacement movement, for example. You have nothing to lose except a bit of time, paper and postage. You could even ask your dealer to back you up with this -- he or she will still get paid for the work if Tissot agrees to extend the warranty.