Question about King Kutter II Gear Driven Rotary Tiller 6ft Tiller Width, Model No. Tg - 72 - Y

2 Answers

My king kutter till will not hold gear oil.

Do I need to buy a new one or can it be repaired with parts?

Posted by on

  • 1 more comment 
  • bphill9253 Mar 24, 2009

    It is leaking at the large gear box on the left side. We put gear oil in and it drains out the bottom. I have not been able to locate anything on the Internet as far as replacement parts only the large gear box seems to be for sale.

  • Harleydick May 11, 2010

    Where is it leaking at?

  • Gerald Billings Mar 20, 2013

    use 000 gear grease or lubeplate that what King Kutter says, you are probably looseing the gear oil thru the tine shaft seal but they are very hard to replace. just use heavy gear grease.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

If it is leaking around the shaft you can replace the seal.

Posted on Mar 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Call Kingcutter at 205-487-3202 and order replacement seals.

Posted on Mar 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound on 3 keys of the piano.


if it only three keys only you may want to find out is it worth fixing the 3 keys or is it cheaper to buy a new one. the cost of labor, cost for parts need to fix issue, and down the road so a week, month or year it happens again 1-2 keys go out, way the cost verses the new unit plus a warranty to new unit, it is better to buy a new one these days cheaper to buy than repair the cost and parts and labor is so high.

i hope this helps

thank you rod

PS call around instruments store, piano and organ shops, ask if they repair and is it worth repairing they will be honest with you

Mar 04, 2015 | Yamaha Dgx300 Electronic Keyboard

2 Answers

How do i get replacement parts?


What kind of part?????????????????? Need make/model of fan.

Aug 17, 2014 | Dryers

1 Answer

6440 husqvarna sewing machine needs repair and replacement parts are difficult to acquire. where to get repair?


Try here http://www.sewingpartsonline.com/viking-6440-sewing-machine-parts.aspx

If your needed part isn't available there... The only hope in that case is to find another Husky of the same model and use one or the other as a parts machine. (or part out your Husky and buy something else with the earnings..... just don't buy new plastic ones)

Aug 24, 2012 | Sewing Machines

2 Answers

I cant understand anything! where is the solution? i need instruction or a guide to repair it.. something like the mainboard plan, or where can i get electronic...


???????????????????????????????????????????????????????
I doubt you will find a circuit diagram for a monitor. They are NOT user servicable.
IF you want it repaired, take it to a repair shop. IF you cant understand anything, just get a new monitor.
It would cost you more buying the equipment to diagnose the faulty part, then buying the parts IF you can buy them. A new monitor can be had for about £90, it could cost you alot more to try and fix it

Jul 30, 2010 | Princeton Digital VL1716 17" LCD Monitor

1 Answer

Craftsman circular saw 7 1/4" broken handle


You can buy the handle for 11.59 per side (left and right halves) you can buy them from: www.searspartsdirect.com They have substutited a new part (probably better one) You would have to decide if 25.00 is worth it to fix your saw. You could buy the part and fix it yourself. A new saw like this one is probably not more than 75.00

Jul 18, 2010 | Craftsman Saws

1 Answer

The gas release arm in my oven has broken. Can a replacement part be obtained or do i need to buy a new oven?


You can buy a new part from us. You may contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service

with your brand and model number and we will get your new parts out asap.

We look forward to working with you and hope to get you cooking again soon. :>)

Nov 06, 2009 | Ovens

2 Answers

My Panasonic Dmr E55 was struck by lightning is this fixable or garbage?


Depends on the extent of the damage, it is possible that it could be repaired but when you wrap up parts then man hours to repair it, might be cheaper to buy a new one.
First off someone has to diagnose the issue and figure out whats blown, repair that part then move on to the next to see what else is needed.
Did you open the cover and check for fuses blown? might want to try that first and replace as needed, but again, may cost less to buy a new one.

Aug 28, 2009 | Panasonic DMR-E55 DVD Recorder

1 Answer

All electric displays do not work; oven does not work


With the symptoms you've described, it sounds like the main control board has failed and needs to be replaced in order to get the oven working again.

The control board is mounted in the backsplash behind the display panel. With the failure of this main board, it could have been caused by a recent electrical outage that may have caused a voltage spike that "fried" the control panel. It is a fairly easy repair, just be sure to turn off the breaker to the oven before you take the backsplash apart to get to the control board.

You can get a replacement control unit for the range, if you feel the overall condition of the stove is worth repairing. I always tell people that once costs to repair exceed 60% of buying new, you're better off buying a new appliance, IF the appliance is 10+ years or older.

You can go to the www.searspartsdirect.com to check for your particular part and get a good idea of the cost to buy the part (others available on the web too), but you'll need to have the complete model number to search for the specific part for your stove. (you're missing a couple of letters and/or numbers)

Hope that helps you decide how you should proceed - repair or buy new. Best regards!

Jul 30, 2009 | Hotpoint RB787 Electric Kitchen Range

1 Answer

Hinge problem


There out it is nothing like a broken hinge only repair solution, the only way to get it repaired is to buy a new replacement shell and replace the broken parts or the whole shell, but some cheap shells wont last and will broke again so read reviews. And if you are not too skilled be careful when replacing or you can get your DS more damaged.

The best is to find a good case broken DS, like water damage etc. to get only the original plastic parts. I should love to have to buy only the broken parts needed but you have to buy the whole thing.

Nov 14, 2008 | Nintendo DS Lite Console

Not finding what you are looking for?
King Kutter II Gear Driven Rotary Tiller 6ft Tiller Width, Model No. Tg - 72 - Y Logo

Related Topics:

1,832 people viewed this question

Ask a Question

Usually answered in minutes!

Top King Kutter Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers

George Merkley
George Merkley

Level 2 Expert

194 Answers

john h

Level 3 Expert

20212 Answers

Are you a King Kutter Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...