HOW TO ''INT'' THE ENTIRE OFFICE

1. Leave the handset on-hook.
2. Press INT (intercom button, not a line key) and press 651.
3. Dial in the date in the format YYMMDD.
4. Press # (or RDL) to save the settings.

Do you mean the GE DECT 6.0 30524 corded/cordless phone? For this landline telephone, you can switch a call from one handset to another (or the base) by using the Intercom feature. Press del/int on the handset or Int on the base and choose a handset number (use the CID +/ phonebook -) buttons (if multiple handsets are registered) or select base from the handset. Press Menu/OK to page the other handset or base. Once that device answers the incoming Intercom call, press and hold Del/Int or Int to create a conference call (both handsets or handset and base listening). Press Del/Int or Int to switch from the Intercom call back to the call on hold. Hang up on the first handset if the person on the second handset will continue to speak to the original caller alone. See pages 24-25 of the manual to see the directions. The direct link to the manual is currently https://www.101phones.com/pdf/ge/30524-user-guide-english-f.pdf .

For any landline phone, to forward a call to another phone number, you need to subscribe to a forwarding option with your telephone company. Check their information for initiating call forwarding.

If you have a different 30524 phone, please add a comment with the manufacturer.

I hope this helps.

Cindy Wells

I guess you want a page key programmed on your set. press feature *3, press a memory key, press feature 610. This key pages all sets when pressed.

What model VTech DECT 6.0 phone?

Press the INT button then the number of the handset to call.

See page 15 of this manual.

Text her, wave to her, or impress everyone by reading the manual.

First you should make sure you have intercom key assigned to your set. Press feature * 0 this is called button enquirey then press the int. key on your set to see what that key is . If you have not int key go into programming and assign int key to set.

OK, model on bottom of phone is DKT2010-SD, but I found a little cheat card in a file for a STRATA DK8 & DK16 so I used a combination of things. First pick up handset and then hit intercom button, # 652 (for time or #651 for date) and enter time in HHMMSS (hour, minute, second) format, once complete hit the redial button.

On the main phone (ext 200 or 10) dial intercom #652 and enter HHMMSS then press redial. Your manuals and guides are here
http://guides.idacomusa.com/

Hi Andrew,

Press [feature] [8] [8] to prevent your phone from receiving the intercom

Brian