What do the flashing blue lights mean on front of refrigerator?

Flashing blue light means it is working!
solid blue light means it is not working!
no light means its not on!

The flashing blue light means the Bluetooth is connectedconnected, device is on.

What model Samsung refrigerator?

Great thanks,

That's just a system indicator flash. Solid blue means on and normal, blinking means someone either turned on the system indicator in the management software or bumped the indicator switch on the back of the server. This was designed to make easier transitions from back to front when working with multiple servers in a rack. To turn the indicator off, just go to the back of the server and find the Ethernet and usb ports that are together. If the usb is the bottom and Ethernet port is the top then just to the right you should see a small blue blinking light and a button, pushing the button wil turn the blinking off.

Again, no worries this is just a "locator beacon" not an error message, if the light ever blinks yellow then you have an issue.

Hope this helps FixYa,

Chris

according to the led flash cycle, you can figure this out. if you open the freezer door and the light flashes two times, that is normal. if you close the flapper on the left side of the freezer, the light should remain lit, and that means that the optic system is functioning correctly. there is a diagram behind the vent panel on the bottom front of the fridge.

Flashing blue light is harmless - it simply means the Identify button has been pushed. There is a small button with a white, cursive 'i' on the front and back of the server - pressing this will make the light flash blue (or make it stop).

Go to Dell's support site and view the manual for the 1650 for an explanation of the beep code - identify the pattern of the beep.

If you are still able to get to Windows, use OpenManage Server Administrator to check the Hardware logs and RAID array.

Blue (three flashes) powering on/enabling indicator light

Blue (steady) pairing mode

Blue with 10 quick purple flashes
pairing successful

Blue (long flash)
standby (connected but not
on a call or streaming music)

Blue (quick flash)
incoming call

Blue (long pulse)
on a call

these are all the normal blue flashes that the s9 makes

The flashing means that the toner and/or the imaging drum is empty or missing (printing halts on these errors). Lights on steady means low toner.

I believe this would mean that your battery either has a low charge or if you have the AC power cord plugged in, it could mean your battery is bad and won't take a charge

it is defrosting, meaning its a self defrost refrigerator and it would defrost the evaporator coil so that the ice would not build up and block the air passing it.

it normally happens every 8 hours if it is a mechanical timer, or as needed if it is an electronic timer.

tnx 4 using fixya,

drcool