USB stuck in Reading mode in Kenwood KDC-W5041U model

Not knowing the model # makes it difficult to give you a difinitive answer. Kingston's support docs all say that after x mny failed logins the device will have to be formatted.
The default # of failed logins seem to be 10.
I think you're out of luck.

Please follow the correct instructions below to enter the code on your device


Hope you are satisfied with my solution.Your valuable feedback would be appreciated.Thanks for choosing Fixya.

TinuAlbinAlex.

hmmm
this seems like a driver problem :)
so download Kingston DT100G2 driver from internet, search in google.com :)
or
update your XP :)

please rate :)

The KDC-X890 will play MP3s that are stored on a USB mass storage device, such as a USB thumb drive. It won't play music from another MP3 player such as a Zune through the USB port, but you could plug your MP3 player into the auxiliary jack.

plug the 4kg data traveller it into a USB port open windows explorer open the data traveller select the files copy and paste into my documents on your computer
hope this helps

1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW.EXE

2. Format

(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)

if you copy one folder should be the same,anyway the .pls is for playlist for winamp  so you need to check if you maid some settings regarding some association ,try to copy first with folder to folder but not in the total commander but in my computer this shold resolve your problem ,and i advice you to reinstal total comander with defalt setting if you tried with that.

try maybe it is bricked or damaged, try downloading Pheonix products which can help u repair any usb damaged storage media, worked on my 8gig usb and nokia n95, or u can try googling flashing utilities for you flash

Hi Cristina,
This is Azeem Inam. your data traveller does not accept data over 101MBs. There can be two reasons for this problem. 1. there may be a virus that has provided a limitation on the copying facility. 2. This can be a partition problem. All you need to do is to use the software called DM (Disk manager). This is a DOS versioned software. Go into its advance installation option and then accept the hard disk kingston data traveller. It will take you to another menu showing the partition styles you may choose. you'll have to choose FAT32 type. then in the next menu you'll have to choose partition size by pressing enter button. and then accepting format you are done. it will start working as new again. Thanks for consulting your problem.

You just plug it into a USB port and your computer will automatically detect it.


Please rate this solution and thanks for using FixYa