Lexar SDHC Card from Kodak Easy Share, disk not recoginized

What type and size memory card? The Z885 works with MMC and SD cards. It won't work with higher-capacity SDHC cards.

SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

The C643 works with SD cards, not with SDHC cards. You have to use SD cards 2GB and smaller.

Some older Kodak Easy Share cameras cannot use the SDHC cards. HC stands for, "High Capacity." This means that the capacity of the card is too big for the camera to deal with. Check your user manual to see what cards are compatible with the camera. You may have to stick with plain SD cards from now on.
If the camera does support SDHC cards, you can try formatting the card on your computer first and then inserting the card into the camera. If the card still does not work, the card may be faulty and you should try to get it exchanged or refunded and pick out a new one.
To format an SD card on your computer:
1. Insert the card into a card reader (like this one: http://www.amazon.com/Mini-Memory-Card-Reader-Writer/dp/B000FNDWLQ/ref=sr_1_1?ie=UTF8&qid=1299296903&sr=8-1 2. Go to "My Computer," and right click on the card. 3. Select format.
On a Mac:
1. Follow step one above. 2. Go to Applications > Disk Utility 3. Select the card from the list on the left and click "Erase" at the top of the right-hand side 4. Click erase at the bottom left corner

The Z760 works with MMC and SD cards. While an SDHC card will fit into the slot, it is electronically incompatible and will not work.

The V530 works with SD cards. Your new 8GB card is an SDHC card. While SDHC cards will fit into the slot, they are electronically incompatible and will not work. You need to go with SD cards, 2GB and smaller.

No. Can you get into the camera menu when you turn the camera on? If so, go to "format" by way of the menu rather than clicking on continue. Also, be sure the slide switch on the side of the card is in the unlocked position.

Unfortunately. you don't. The Z612 works with SD cards, not SDHC cards. You're limited to cards 2GB and smaller.

Never, never, never format a camera card in the computer if you are planning to use it in a camera.

I bought a 4gb scandisk sdhc card and my camera wants to format the disk but it won't