Whenever i watch tv (using HDMI cable) the receiver seems to be searching for a different mode to play audio through. i've cycled through all of the different modes, but i still get a momentary break in audio about once a minute. during the break, the display on the receiver changes. i confirm that it is the receiver because i can just rewind whatever im watching using tivo and the audio that once was not there is listenable, of course until the receiver starts looking for a new playback mode. or atleast this is what i think it is doing. any help? thanks in advance
The receiver is not locking on the digital audio on the HDMI. Try a different cable or sat box if you use one. Use a digital audio cable instead of the HDMI to the reveiver. HDMI is full of issues.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you're experiencing audio issues with your Sony TV, the first thing you should do is check the audio settings. Make sure that the TV is set to output audio to the correct source.
For example, if you're using an HDMI cable to connect to a sound bar, make sure that the TV is set to output audio to the sound bar. If you're using a receiver, make sure that the TV is set to output audio to the receiver.
2. Try a different HDMI cable:
If you're using an HDMI cable to connect your TV to a sound bar or receiver, try using a different HDMI cable. Sometimes, the cable can be the issue.
3. Check your sound bar's audio settings:
If you're using a sound bar, make sure that the sound bar is set to the correct audio input. For example, if you're using an HDMI cable to connect the TV to the sound bar, make sure that the sound bar is set to the HDMI input.
4. Check your receiver's audio settings:
If you're using a receiver, make sure that the receiver is set to the correct audio input. For example, if you're using an HDMI cable to connect the TV to the receiver, make sure that the receiver is set to the HDMI input.
5. Try a different audio input:
If you're using an HDMI cable to connect your TV to a sound bar or receiver, try using a different audio input. For example, if you're using an HDMI cable to connect the TV to the sound bar, try connecting the TV to the receiver using an optical cable. 6. Restart your TV: If you're still experiencing audio issues, try restarting your TV. Sometimes, this can fix the issue.
Hi,Even
though you have not mentioned about the cabling connections you have done, for the sake of correct
connection I describe all the possible cabling alternatives to you..You
can select whichever you want.. TO WATCH DVD ON THE TV: ** Receiver's "AUDIO and VIDEO OUTPUT as " 2xRCA Audio+1x Video " or "Optic Cable OUTPUT or " HDMI Output " of your Home Theater Receiver (whichever you want ,based on the existing sockets and necessary cables on your hand ) **
AT TV side : you need to connect "Audio+ Video input s " as can either be : 3xRCA jacks or
"Optic cable input " or HDMI IN connector of your TV , ** than just switch to
DVD mode on Receiver and play DVD *You can use "HDMI" connections as well but sometimes HDMI creates problem on Audio.. TO LISTEN YOUR TV ON SURROUND SYS. **
AT TV side : you need to connect "Audio Output " as can either be : 2xRCA jacks or
"Optic cable output" or HDMI connector of your TV , ** to Receiver's "TV input "or "AUX input" or "Optic Cable input" or HDMI of your Home Theater Receiver (whichever you want ,based on the existing sockets and necessary
cables on your hand ) ** than just switch to
respective SOURCE mode on Receiver corresponding the connector you have used on the back of Receiver .. *You can use "HDMI" connections as well but sometimes HDMI creates problem on Audio..
Pls remember.."IN " goes to "OUT" or vice versa..all the times..
There you go..Both Tv and DVD sound are on the Receiver as SURROUNDING SOUND.By this means ,whatever you watch on the TV will come thru your Receiver's SURROUNDING SOUND speakers as well.
Hope this helps!..if more help requires pls let me know. Take care
Hi,Even though you have done some cabling already,for the sake of correct connection I describe all the possible cabling alternatives to you..You can select whichever you want.. TO WATCH DVD ON THE TV: ** Receiver's "AUDIO and VIDEO OUTPUT as " 2xRCA Audio+1x Video " or "Optic Cable OUTPUT or " HDMI Output " of your Home Theater Receiver (whichever you want ,based on the existing sockets and necessary cables on your hand ) **
AT TV side : you need to connect "Audio+ Video input s " as can either be : 3xRCA jacks or
"Optic cable input " or HDMI IN connector of your TV , ** than just switch to
DVD mode on Receiver and play DVD *You can use "HDMI" connections as well but sometimes HDMI creates problem on Audio.. TO LISTEN YOUR TV ON SURROUND SYS. **
AT TV side : you need to connect "Audio Output " as can either be : 2xRCA jacks or
"Optic cable output" or HDMI connector of your TV , ** to Receiver's "TV input "or "AUX input" or "Optic Cable input" or HDMI of your Home Theater Receiver (whichever you want ,based on the existing sockets and necessary
cables on your hand ) ** than just switch to
respective SOURCE mode on Receiver corresponding the connector you have used on the back of Receiver .. *You can use "HDMI" connections as well but sometimes HDMI creates problem on Audio..
Pls remember.."IN " goes to "OUT" or vice versa..all the times..
There you go..Both Tv and DVD sound are on the Receiver as SURROUNDING SOUND.By this means ,whatever you watch on the TV will come thru your Receiver's SURROUNDING SOUND speakers as well.
Hope this helps!..if more help requires pls let me know. Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :)
Hi, it seems to be ,you have a possible wrong connection..I may I recommend you to check the connections in accordance with my model connection procedures given below and correct if something is misconnected..
I believe Your Television ,vcr and dvd player all connected to each other thru Technics Receiver itself (not directly connected to each other ) and whenever you want to listen/watch any of it ,you make a selection thru Receiver.. ** in order to do this both DVD and VCR 's "2xRCA audio" and "1x RCA Video" cables for "IN" and "OUT" should go to Receiver separately ..("IN" goes to "OUT" of other ..pls remember,Always reverse connected ) ** Additionally your RECEIVER's prefably only "1xRCA Video Output " should go to TV to watch the video of both DVD and VCR (audio will come thru Receiver.)
Ok, now Since you successfully connected your Receiver to play video on TV (one way only ) ,here is the second reverse action to listen your TV on Receiver ** you need to connect "Audio Output " as can either be : RCA jacks or "Optic cable output" or "SCART "connector " of your TV .( every TV has different type of Audio out jacks ) ** to "TV input "or "AUX input" or "Optic Cable input" of your Receiver (whichever you want ,based on the necessary cables on your hand ) ** than just switch to
respective mode on Receiver corresponding the connector you have used on the back of Receiver .. There you go..Tv sound are on the Receiver .
Hope this helps!..if more help requires pls let me know. Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :)
If your TV has HDMI in and digital optical out, run your HDMI cable via HDMI out on box to, HDMI in on TV then, run digital optical ouyt from TV to digital optical in on reciever. Your reciever has video pass through but, not the best option. Video components should run to TV then out to reciever. If you do not have digital optical out on TV, you may be able to use RCA.
The TV and DVD player make and model would be helpful to know. I would recommend running its BEST digital audio to the receiver and its stereo analog audio to the TV just in case you want to watch and hear the DVD in a lo-fi setting without the Denon. I generally advocate for connecting anything high-end (audio or video) ONLY to equipment that can use it or enhance it. Otherwise you may just be wasting expensive cable and adding unnecessary hops and connections that can fail.
Why do you want the audio to go from the DVD to the TV through the Denon? Are there no speakers on the Denon? Modern TV's have lots of inputs for the flexibility I recommend but rarely have decent audio or speakers.
Hello,
There are two things that I can suggest.
1-Test your optical cables to make sure they a good on a known working source because they are very fragile and break very easily.
2-Try to eliminate the use of optical output from tv to receiver. There may be a problem from the HDMI to optical conversion at the tv. Instead, try running the audio directly from the source to the receiver, and let the tv deal with video input only.
Hope this helps,
Good Luck.
In order for you to be able to have a different audio source from your video, i.e.; have "radio sound" instead of "video game sound", you have to connect your HDMI cables from the game console directly to the TV/Monitor.
The reason for this is that video and audio are carried simultaneously over a single connection on HDMI. If you make your HDMI connections through a receiver to a monitor, whenever you change your input to the radio you also lose your video game picture.
So to summarize;
Power off your receiver and game console.
Disconnect your game console HDMI cable from the receiver.
Reconnect the HDMI cable to the TV.
Turn on the TV, then the receiver, then your game console. Then change your receiver input to the radio.
You may be able the settings of your directTV box to stop frustrating you. If you help me identify the model you are using, I can research the proper menu choices you will need to choose to select the correct features. There are many different directTV set-top boxes available.
My own home theater setup did the same thing, and my solution was to use component cables from the PVR instead of HDMI cables. It is too bad your blu-ray doesn't allow for this configuration.
My work-around until I realized that using different interconnects fixed the problem, was to turn the TV off and then on again whenever switching from HD to non-HD sources. This fixed my problem, maybe it will fix yours.
switch the HDMI cables around to make sure its not one of them, if the problem is one of them it will move with the cable,if no change i would suspect the coaxial cable next.
×