Very loud noise during draining cycle, cleaned all traps and arms, works fine in cleaning dishes, just sounds like its gonna take off when draining throgh out the cycle's other then that its quite.
Dishes and glass have film on them
I had the same problem. The motor had to be replaced. For as much as we paid for this it has not lived up to the Bosch name. It's never been as quiet as other people talk about, and then the motor went out! It's only 2 years old.
Hi
If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next thing to check for is the water pressure and fill valve. Check if the water is filling in and the spray arms are throwing the water with enough pressure. Try and listen to the sound if you hear a proper spraying action sound.
If it seems as a low water pressure then check the fill valve. Now, check if dishwasher is draining the water or not. While the dishwasher is working check whether the dishwasher is draining and there is not much left out water after the cycle is complete. Try cleaning the spray arm with a soft brush. The water temperature plays a major role in cleaning of dishes. The temp should be between 125 and 150 F for dishwasher to clean the dishes. Hope this helps...
1,036 views
Usually answered in minutes!
Where is the inlet valve on my dishwasher?
Dishwasher powers/churns/drains but will not run cycle and within minutes of starting beeps that the dishes are clean. I have tried every reset option I can try. I have turned the electricity off at the breaker for 5 minutes and turned back on...no luck getting a dishwasher cycle to run. Dishwasher ran fine until the problem. The unit has not been moved so do not think it is a kink in the hose, etc.
all cycles work correctly, dishes are clean, water is drained at end of cycle, nothing clogging the drain
×