When I plug in the washer, the keypad lights up and goes through a pretty blinking sequence. (like the christmas tree lights that blink in time with the music)None of the buttons are responding and it will not start, pause or anything. The blinking has a definite order to it; it seems to be checking each function starting at counting down on the timer to 0 and then starting again? Am I crazy or did I buy the most expensive xmas decoration ever?
Had the same issue, cycle normal light keeps on flashing. I turn the knob just made a beeping sound but the light stayed fix and flashing on normal.
I replaced the lock-lid sensor that was seen to fix the issue.
First things first... please follow this link to see if your machine is part of Maytag's recall... http://www.washerrecall.com/ or this site for details on the recall... http://www.cpsc.gov/cpscpub/prerel/prhtm...
Hi
Open the door. Within 3 seconds press the following sequence --Try pressing normal wash, heated dry, normal wash, heated dry, normal wash, heated dry three times within 6 seconds and then press cancel to reset the dishwasher. If that doesn't help then try pressing Saini Rinse, Heated Dry, Saini Rinse, Heated Dry, Saini Rinse, Heated Dry or Saini Rinse, Air Dry, Saini Rinse, Air Dry,Saini Rinse, Air Dry 3 times in 6 seconds and then the Cancel Button. Close the door and press Cancel.
Blinking lights would stop and should be able to use your dishwasher normally. If the light is still blinking try and reset the power to the dishwasher and try again. If still the light is blinking then check for the connections on the keypad, it may be due to moisture or shorted connections on keypad.
Hope this helps... Please post back if you need more information.
Daniel
1,204 views
Usually answered in minutes!
Just bring your laundry on over to my house anytime!!! Guru, I called Maytag hotline, surfed the net for two days and finally made an appointment for our homely lonely maytag guy to come out. And how sweet it is to call them back and tell them to get another date as the GURU done fixed the thang! You are awsome.
I have the same problem. Mine is a Neptune TL top load washer. What would be the combination of buttons for this model.
×