Making jabra bluetooth headset work with motorola v9 phone

abra burst onto the audio microtechnology scene in the early 1980s, gaining initial attention for its Macintosh EarPHONE telephony products. Jabra's cell phone Bluetooth headsets have also garnered wide acclaim for their sleek aesthetics and compact form. Jabra Bluetooth headsets can be connected or "paired" with virtually any cell phone by using a few simple steps.

1. Ensure that your Jabra headset is turned completely off. Press the tap button on the headset until it ceases flashing and the light goes off.
   
2. Step 2 Hold down the tap button to power your Jabra headset back on. Keep holding the power button until the lit power indicator cycles past flashing mode and becomes solid.
   
3. Step 3 Release the power button.
   
4. Step 4 Navigate through your cell phone "Settings" menu and ensure your "Bluetooth" or "Hands-free" section is set to the "On" or "Active" mode.
   
5. Step 5 Elect to "Search for new devices" or "Find new devices" on your phone's Bluetooth or hands-free menu.
   
6. Step 6 Place the Jabra headset close to your phone to ensure it can be discovered by your cell phone.
   
7. Step 7 Select a "Connect" or "Pair" option once the Jabra headset name is discovered and displays on your cell phone.
   
8. Step 8 Enter the default passcode by entering "0000" on your cell phone keypad.
   
9. Step 9 Ensure that the Jabra headset has been paired. Look for the Bluetooth icon in the upper portion of your cell phone screen. Make a call to verify that audio is being routed through the Jabra headset.
   

Hello,

In your Jabra bluetooth headset, press and hold the button in the headset until you see BLUE flashing light. Once the light is flashing in the Jabra, go to your Motorola phone and search for any Bluetooth device in range. when the Jabra shows up, select the Jabra and put in the pin code for the headset "its either 0000 or 1234)

Cheers!

Hi,

Follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for around 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Jabra device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.

• The headset is now paired with the phone

Hope this helps

Chris (ziraffa)

I took my husband's suggestion and used 0000 and it worked. My husband claims it is the factory default for all bluetooth headsets. Try it and let us know if it works.

This is not actually a solution, but when I had the same problem with my Jabra (which I think is one of the best), I took it to my phone store and they synched it for me. Lots of navigating around and knowledge of a code to input. Screw it, let them do it!

Here is a list of compatible bluetooth headsets taken from the Blackberry web site.

Flamingo™ Bluetooth Headset *

Jabra® BT250v

Jabra JX10

Jabra BT125

Logitech® Mobile Pro™ Headset

Motorola® Bluetooth Headset H500 **

Motorola Bluetooth Headset HS820

Motorola Bluetooth Headset HS850

nXZEN™ 5000

Plantronics M3000 Bluetooth Headset

Plantronics Discovery™ 640 Bluetooth Headset

Plantronics Explorer™ 320 Bluetooth Headset

Plantronics Voyager™ 510 Bluetooth Headset

scala-500™ ***

Sony® Ericsson® Akono™ Bluetooth Headset HBH-602

It may be a compatibility issue with the H700. You may want to make sure the volume is turned up fully on the headset as well.
Good Luck

Verify that your Jabra BT headset is turned on. You might need to "discover" the device as well.Your RAZR should have instructions on how to pair devices.

okay, try this, turn off the jabra headset, and then, hold the power button but hold it down until the lights flash in a different way, and make ur phone search for devices and if it finds it then its all good, just use the 0000 password to pair it.if this works give me a fix rate. thank U

u gotta make ur jabra go to FIND ME Mode, u do this by turning it off, Turn it back on by pressing power for 6 to 8 seconds until the light is in flashing mode, and make Ur razor look for devices and pair it with the 0000 code. hope this works for you

Hey guys, hold the button pressed for 6 sec. until led is solid. then search bluetooth devices on phone click on Bluetooth headset insert '0000' press OK now it should work, or check http://jabra.com for compatibility. Best wishes, htmlfreak.