Re: Panel of GE profile gas range says 'LOC ON', how do I...
This is the controlled lock out mechanism so that your children cannot play wilth the controls. Press "0" and "9" at the same time and hold them until it says "LOC OFF."
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The keypad is "locked", hold down the button to remove this (usually "clear") for 5 seconds. Look closely at the buttons, one of them will have a picture of a padlock near it. That's the button that clears the "lock" condition. It's a safety feature to keep the kids from turning on the oven.
Control Lockout (on some models) Your control will allow you to lock out the touch pads so they cannot be activated when touched or cleaning the glass panel.
To lock the controls:
Touch the 9 and 0 touch pads at the
same time for 3 seconds until the
control beeps twice. The display will
show LOC continuously and the time
of day if not blacked out. NOTE: All cooking and timing functions will be cancelled when locking out the control.
To unlock the control, touch the 9 and 0 touch pads at the same time
for 3 seconds until the control beeps
twice, and LOC will be removed from
the display. NOTE: Some models have a Control Lockout pad. Touch and hold it for 3 seconds to lock/unlock. Gas/Control Lockout (on some models) Your control will allow you to lock out the surface burners, oven burners and control panel so they cannot be activated.
To lock/unlock the controls:
Turn all surface burners off.
Touch and hold the Gas/Control Lockout pad for 3 seconds until the
display shows LOC ON.
To unlock the control, touch and hold the Gas/Control Lockout pad for 3 seconds
until the display shows LOC OFF.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show LOC ON. The control lockout mode affects all controls. No controls will work when this feature is activated. The adjustment will be retained in memory after a power failure.
Try this: find your breaker panel and shut off the pair of breakers to the stove (usually 40 amperes or better) and turn them back on after a minute or two. That should reset everything.
Some need you to hold the up and the down temp arrows for about 5 seconds
Some need you to hold the up and the down temp arrows for about 5 seconds.
×