Samsung printer ml 1510 red light flashes after self test

LP-365W On Line LED Is Solid Red - samsung product ...

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsImportant: Before you perform any type of service on your printer that requires you to... Any of these conditions can cause the On Line LED to glow solid red:.

On Line LED Is Solid Red

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsDec 2, 2014 - Important: Before you perform any type of service on your printer that ...Any of these conditions can cause the On Line LED to glow solid red:.

Samsung ML-3561N Laser Printer Initialize - Questions - Fixya

www.fixya.com > ... > Samsung > ML > Samsung ML-3561N Laser Printer
ML-2570 Samsung printer having problem orange LED is blinking ... initializing stage green LED glows continuosly,After initializing Printer green LED turn into ... the red light remains on when i switch on the printer.. and it doesnt initialize the ...

Samsung glow plug Printers & Copiers Questions ... - Fixya

www.fixya.com > Forum > Tags > glow plug > Printers & Copiers
Printer Problems...red status light glowing I bought a Samsung CLP-310W a ...Samsung printer having problem orange LED is blinking in initializing stage ...

Reset for Samsung ML-1660 ' FixYourOwnPrinter

User Guides Manuals

its of Paper count problem. tourn of printer power and open the back cover and find the IC 366...... ita a small 8 pin ic just short Pin NO 1 And 4 just restart the printer ur problem has been resolaved

It mean when your toner is near empty,then red light flashing.tow light is fixed or red mean toner cartridge is empty.must be replace toner cartridge.You buy a new cartridge and put in your printer then printer is OK.
you can also get better idea please read printer user guide.

There is probably still paper stuck in the paper path, this is very common. What happens if you load it with paper and press the test button?

Hi
It maybe one of the fuse gone.

You have to change the fuse:
The fuse is 250mAh and 3/4" inch long (20 mm) round glass with metal ends. The electrical contacts are not in the cartridge but inside the printer: There is a plastic fuse holder on the cartridge, even the starter cartridge. You just simply pop it into the holder. This will stop the flashing red LED and the system tray will say the cartridge is full.
All The Best: Pineworks

dear sir

1. it is problem paper miss feed
2. over temparature

clean thermostator.thermostator over dry toner
or cartridge assembling problem

try to reset the printer by opeing the front cover and close it again.

try to rest the printer by opening the front cover (not the paper tray) and closing it again.

contact service centre in india std code+ 30308282


we have solutions for your printer when it shows toner exhasted

We have Zero cost solution for samsung -scx-4300, scx-4824/4828
ml-2240,ML 2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.

www.nakshatraworld.com

mob: 9713862555, 9893282285
[email protected]